discovery123
Member Since: 24 Sep 2010
Location: UK
Posts: 2
|
Hi all just replaced the epb module and new brake pads disc and hand brake shoes adjusted the shoes and pads and done the bedding in procedure all the lights went out all was fine. then put the hand brake on and it started to scream again and now it sound like the epb module is try to over thighen the hand brake not sure if i have damaged the module got another moudule coming but dont want to put on if it does it again could i be a ecu problem any help would be appreciated
|
24th Sep 2010 1:30 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
It sounds as thoiugh you haven't doen the EPB adjustment fully on both sides TBH. Or as you say a failed module. I'd do the EPB adjustment again first Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
24th Sep 2010 2:13 pm |
|
|
discovery123
Member Since: 24 Sep 2010
Location: UK
Posts: 2
|
thanks for your reply will have a go at readjusting
|
24th Sep 2010 2:21 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Just use the link in my sig to see the epb adjustment instructions. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
24th Sep 2010 5:26 pm |
|
|