Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Wished to update this thread
So now got the loom req to retrofit heated windscreen washer jets , this loom is part of the main engine loom
Now I’ve got this loom I know what bits are needed, therefore will find the separate connectors etc in order anyone can make up a new loom without having to buy an engine loom
Might take me a while but will keep updating the threads accordingly
Last edited by gstuart on 8th Jun 2019 9:04 am. Edited 1 time in total
8th Jun 2019 9:01 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Will do a technical list , ie length of cable, washer tubing etc etc to make life easier and how it’s all connected
8th Jun 2019 9:03 am
indy4x
Member Since: 24 Nov 2017
Location: Pontypool
Posts: 193
Following this with interest
Cheers for the updates
10th Jun 2019 10:31 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Ur very welcome , have spent ages trying to get all the details together to make life easier for the next person
Heavy rain has stopped play at the moment
But i can start putting a few details here , will update it as I go along so don’t worry if it looks incomplete
So that it will make more sense as I edit this thread
Will also find links I can for new terminals
The rolling pics are of the main engines fuse box, as I bought a complete engine loom and fuse box I thought it easier to show with the items outside the disco
This is what the fuse box looks like when its lifted off
Showing spare fuse box out the disco, Lift these tabs to remove top section of fuse box
Top half lifted
Items for the heated washer jets
11th Jun 2019 12:31 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
This is just to put the pics here, I’ll sort them out and put titles
Fuse box with fuse in number F12
I removed the fuse and put a paper clip through the right hand side of the fuse , turned the fuse over to show Other side
This is where the brown and yellow wire is fitted
Picture of loom, but seeing there only 3 x wires and s few connectors will be easy to make up ur own heated washer jet loom
End of connectors that go into he fuse box,
yellow brown to fuse
Black x2 for earths
Closer pics of the terminals
These connectors are for the heated washer jets end , x2 and 2 x earths
Last edited by gstuart on 11th Jun 2019 1:06 am. Edited 2 times in total
11th Jun 2019 1:02 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Blue line is the route the wire takes from the fuse box to heated jets
Will take some more pics to show it clearer
Last edited by gstuart on 11th Jun 2019 1:20 am. Edited 3 times in total
11th Jun 2019 1:03 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Please bare with me as this will be my first write up report , so want to ensure everything is explained and lined up
Thks
11th Jun 2019 1:05 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
This section will be for all the measurement etc in how to make up the wiring loom, will be finally edited
Power for the heated jets comes from engine bay fuse number F12e, rated at 10 Amp
Shopping list
4m x Brown / Yellow wire , needs to be above a 10 x amp rating / cable diameter is 3mm
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum