2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
6th Jul 2017 11:13 am
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Bobby, check the profile of the front foot against the roof to ensure it correctly follows the curve down towards the front screen.
One of mine was a little straighter than it should have been and I had to warm it up with a heat gun to "persuade" it a little. Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
Good luck fella hope they are ok. The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
6th Jul 2017 1:57 pm
Bobbygg
Member Since: 09 Nov 2016
Location: Northumberland
Posts: 111
FAILED
They're going back!
No pictures, sorry, I was that pee'd off, they look really good quality, first issue I found that the holes for the screws were smaller diameter than the original LR ones and the screws look like they are made of cheese
But the main issue is that they are bent too much, if I lined up the first hole after the roof step, the second one was close, but the front and back ones were no where near, they were so far out that they were lying towards the glass roof panel with a large gap showing to the rail channel
Never mind, I've left the short ones off for now as the channels need a good jet washing out, before I order powerful ones
Lesson learned
RobD3 V8 with active rear diff
6th Jul 2017 7:26 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
What are bent too much?
Confused.comMods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
6th Jul 2017 8:32 pm
Bobbygg
Member Since: 09 Nov 2016
Location: Northumberland
Posts: 111
Yeah, like bananas
I'll take pictures at the weekend before I send them backD3 V8 with active rear diff
6th Jul 2017 8:38 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
Are you saying the rails themselves are bent?Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
6th Jul 2017 8:43 pm
Bobbygg
Member Since: 09 Nov 2016
Location: Northumberland
Posts: 111
Yup, just a slight bend in at least the offside one when they should be straightD3 V8 with active rear diff
Go for the Powerful UK ones, I will vouch for them The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
7th Jul 2017 1:51 pm
Parmenian
Member Since: 28 Mar 2016
Location: St Peter Port
Posts: 129
Can I ask why you chose that rack? Purely price? I notice it has no slots for eye bolts and the like. How do kayak rack, bike racks, can holders etc fix to it?
Sorry, another question, are the extended rails the same width apart at the front or would a shorter roof bar be required to fit across it? I appreciate you may not know the answer to that one, but I've some Thule bars and need to carry a 3+metre kayak so need the front bars a long way forward.
The reason is fella its flat and I can mount and open my roof tent without it catching on side bars and the like. I also have just treated myself to a Howling Moon side awning (you can see the mount on the side of the rack) I had no real preference except it had to be flat and thought for £550 including light bar it was a good price. It is a very strong and sturdy and is all ally. You can buy various fittings for it from Patriot including side bars and jerry can mounts if you like As for the other question I don't think they go much narrower at the front. Hope that helps my friend
The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
29th Jul 2017 7:16 pm
ostosix
Member Since: 19 Mar 2017
Location: Lincoln
Posts: 305
I've just got a set from ebay for £112 and although the extrusion looks good, one side was bent sideways to the extent that the end of the rails was 40mm away at the other end.
Also the instructions seem to be translated because they pretty much mean nothing.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum