Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Replacing Interior
hi Guys,
Ive just fitted an Alpacca interior (well most of the easy stuff!) and i need instructions on how to remove the center console, the glovebox assemblys on the passenger site and the main radio/air con surround.
Any ideas where i can get any removal details?
Cheers"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
13th Aug 2011 8:50 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
bang us your email address and I'll send what I have
13th Aug 2011 9:22 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
sorry chief , was thinking D3
13th Aug 2011 9:28 pm
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
It is D3 Wex
Pm on the way "you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
13th Aug 2011 9:37 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
PM me your email address and I'll send you what I have
14th Aug 2011 6:33 am
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Wex...nothing about the dash in the info you sent
In the spirit of having a go and biting off more than i can chew, i now have a tub of torx bolts,all the radio, air con, and 12 v controlls removed and the effin glovebox is still rock solid
There are a couple of torx bolts i must need to get to, but i have a horrible feeling the center console and cubby box trim will need to comeout to get to em....HELP!!!!
Anyone done similar who can help me out?"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
20th Aug 2011 8:36 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
Email sent, hope it's of help
21st Aug 2011 8:25 am
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Nick your a star....thank you very much Sir
Interior now in "you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
21st Aug 2011 6:35 pm
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 2692
If you don't mind me asking.
What interior have you taken out?
Darrell
21st Aug 2011 9:11 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
discocuzzy wrote:
thank you very much Interior now in
no problems, you're welcome. I assume you had a busy Sunday then?
Busy? He was just driving around going nowhere fast when I saw him The End
22nd Aug 2011 6:36 pm
Ruper
Member Since: 28 Jun 2019
Location: Virginia
Posts: 312
SAme problem
I know this is an old thread but I am in the same pinch. I can't get this center back console piece out.
What;s the secret as I need to get the repaired glove box frame back in, and it goes behind this piece. Before I cut this this up, some help appreciated.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum