RSS Feed 2.2.4 2013-05-20T14:01:45Z Stacey1jamie Technical (D3) Stacey1jamie http://www.disco3.co.uk/forum/post1106138.html?#1106138 2013-05-20T08:42:19Z 2013-05-20T08:42:19Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=23146" target="_blank">Stacey1jamie</a><br /> Subject: lack of drive<br />Posted: Mon May 20 2013 9:42am (GMT 1)<br /><br /><span class="postbody"> Hi everyone, <br /> wonder if you can help me? <br /> <br /> My vehicle has been driving fine, went to Essex and back on Saturday, drove around yesterday. Then, got into my disco this morning, drove off as normal, but then lost drive, like a clutch slipping!!!! I stopped the vehicle tried to pull off and more of the same. If I put the vehicle into reverse, it wont go anywhere!!!! <br /> <br /> Service history shows a torque converter fitted 25,000 miles ago, before I owned it....<br /><br /><a href="http://www.disco3.co.uk/forum/post1106138.html?#1106138">view forum post</a><br />_________________<br />2.7tdv6 SE. <br /> 22inch overfinch wheels <br /> Chipped <br /> Egr valves blanked <br /> Landrover side steps <br /> Bi xenons</span><br /> df Technical (D3) df http://www.disco3.co.uk/forum/post1105843.html?#1105843 2013-05-19T16:11:43Z 2013-05-19T16:11:43Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=4550" target="_blank">df</a><br /> Subject: Stuck in extended mode...the perfect d3?<br />Posted: Sun May 19 2013 5:11pm (GMT 1)<br /><br /><span class="postbody"> Hi all <br /> <br /> So we were on a trail when I noticed the car said all special programs were off. Fearing limp mode I never disengaged low range until we were done. <br /> <br /> I drove home 150km and its still in EM. Says suspension fault. When you first put the key in the solid line and high mode lights are on, shortly there after the lights go out and it just beeps if you try to change the height. <br /> <br /> Any ideas?<br /><br /><a href="http://www.disco3.co.uk/forum/post1105843.html?#1105843">view forum post</a></span><br /> Triarii Technical (D3) Triarii http://www.disco3.co.uk/forum/post1105824.html?#1105824 2013-05-19T15:14:11Z 2013-05-19T15:14:11Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=19934" target="_blank">Triarii</a><br /> Subject: Offside wheel on right hand bends<br />Posted: Sun May 19 2013 4:14pm (GMT 1)<br /><br /><span class="postbody"> Currently winding thru the Dales and noticing on tight right hand bends over 40 say that the offside wheel seems to graunch and drag with some judder. Had new pads and discs up front 2 weeks back and MOT 1 week back. Any clues?<br /><br /><a href="http://www.disco3.co.uk/forum/post1105824.html?#1105824">view forum post</a><br />_________________<br />...and an equally black SL350</span><br /> rocko Technical (D3) rocko http://www.disco3.co.uk/forum/post1105745.html?#1105745 2013-05-19T10:14:02Z 2013-05-19T10:14:02Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=10224" target="_blank">rocko</a><br /> Subject: Air con not cold after regas<br />Posted: Sun May 19 2013 11:14am (GMT 1)<br /><br /><span class="postbody"> Hi, <br /> <br /> I've done a search but not found anything.... <br /> <br /> I had my aircon regassed yesterday, there was only 60g in the system and it was vacuum tested and refilled with 810g of coolant. <br /> <br /> The compressor is running, and the pipe in the engine bay is getting cold, but there's not cold air at the vents. <br /> <br /> Would love suggestions to check.? <br /> <br /> Thanks in advance <br /> Trev<br /><br /><a href="http://www.disco3.co.uk/forum/post1105745.html?#1105745">view forum post</a></span><br /> Rob and Charms Technical (D3) Rob and Charms http://www.disco3.co.uk/forum/post1105543.html?#1105543 2013-05-18T18:17:12Z 2013-05-18T18:17:12Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=25964" target="_blank">Rob and Charms</a><br /> Subject: Check the inlet hose<br />Posted: Sat May 18 2013 7:17pm (GMT 1)<br /><br /><span class="postbody"> Hi <br /> <br /> I am mentioning this just as matter of course, as it seems this becoming a rather common proble on the Disco3 diesel models, according to the dealer at least. <br /> <br /> I had to replace the inlet hose, the one leading from the intercooler leading to the inlet manifold on top of the motor. It is the rather thick black hose that is right infront of you when you open the bonnet. The fault finding was rather tricky thou as the hose had torn, but it was difficult to...<br /><br /><a href="http://www.disco3.co.uk/forum/post1105543.html?#1105543">view forum post</a></span><br /> TOMDOB Technical (D3) TOMDOB http://www.disco3.co.uk/forum/post1105338.html?#1105338 2013-05-18T07:49:25Z 2013-05-18T07:49:25Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=13241" target="_blank">TOMDOB</a><br /> Subject: Should I pressure wash a TDV6 engine<br />Posted: Sat May 18 2013 8:49am (GMT 1)<br /><br /><span class="postbody"> Morning All <br /> <br /> MY TDV6 has developed an engine oil leak in the VEE. It's not bad but as there's so much going on in the VEE it's difficult to see where it's coming from, don't think it's coming from the filter. I've never hesitated before with washing engines, but as there's that much going on under the bonnet I thought i better check with those who know best!! Should I- Shouldn't I?<br /><br /><a href="http://www.disco3.co.uk/forum/post1105338.html?#1105338">view forum post</a></span><br /> mr freeze Technical (D3) mr freeze http://www.disco3.co.uk/forum/post1105129.html?#1105129 2013-05-17T16:34:45Z 2013-05-17T16:34:45Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=25634" target="_blank">mr freeze</a><br /> Subject: Help - air suspension problems....inc codes<br />Posted: Fri May 17 2013 5:34pm (GMT 1)<br /><br /><span class="postbody"> Hi, <br /> <br /> I'm having trouble with my D3, it shows a red warning light and &quot;normal height only&quot; sometimes down to bumpstops sometimes not. <br /> <br /> Ignition off, start up and off we go again. <br /> <br /> It is very odd behavoiur. <br /> <br /> I had the codes read and cleared: <br /> <br /> C1A11 <br /> Pressure decreases when system inactive <br /> C1A03 <br /> LHF sensor signal not in range <br /> C1A04 <br /> RHF sensor signal not in range <br>...<br /><br /><a href="http://www.disco3.co.uk/forum/post1105129.html?#1105129">view forum post</a></span><br /> Ededdie Technical (D3) Ededdie http://www.disco3.co.uk/forum/post1104724.html?#1104724 2013-05-16T17:40:53Z 2013-05-16T17:40:53Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=25766" target="_blank">Ededdie</a><br /> Subject: D4 ZF 6HP28 into D3 is it Posible !?!<br />Posted: Thu May 16 2013 6:40pm (GMT 1)<br /><br /><span class="postbody"> Hi all <br /> <br /> Need some advise from the Experts. <br /> <br /> Can one put the D4 ZF 6HP28 into a D3 !? <br /> <br /> Just wondering as i can get a ZF 6HP28 transmission. And just wondering if is good for a spare box just incase!! My box gives up its ghost! <br /> <br /> What changes does one make! Do i need to change the transfer box as well? <br /> <br /> The guy from Zf told me that its not posible as it Will Fit, but the computer wont talk to the Main Engine...<br /><br /><a href="http://www.disco3.co.uk/forum/post1104724.html?#1104724">view forum post</a></span><br /> benh Technical (D3) benh http://www.disco3.co.uk/forum/post1104617.html?#1104617 2013-05-16T14:34:26Z 2013-05-16T14:34:26Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=20955" target="_blank">benh</a><br /> Subject: Loses power when turning corners<br />Posted: Thu May 16 2013 3:34pm (GMT 1)<br /><br /><span class="postbody"> When approaching a junction and turning; cross roads, t-junction anything like that, the Disco over-revves (up to about 3000) but doesn't accelerate, like it's slipping out of gear. It's an automatic by the way. After a few seconds it'll accelerate, but there's definitely something wrong. It doesn't do it on roundabouts, it seems to be 90% angle that does it. Speed is irrelevant; although I've never done 60 at a t-junction it doesn't matter if it's 5 or 15 mph. All help greatly...<br /><br /><a href="http://www.disco3.co.uk/forum/post1104617.html?#1104617">view forum post</a></span><br /> Chips1973 Technical (D3) Chips1973 http://www.disco3.co.uk/forum/post1104598.html?#1104598 2013-05-16T13:19:30Z 2013-05-16T13:19:30Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=18477" target="_blank">Chips1973</a><br /> Subject: Sat Nav only highlights numbers<br />Posted: Thu May 16 2013 2:19pm (GMT 1)<br /><br /><span class="postbody"> Sat Nav has been working fine but now when I go to enter postcode only the number buttons are highlighted making it impossible to input the letters below which are greyed out , I have tried restore default settings but makes no difference ....Any ideas what's wrong ?<br /><br /><a href="http://www.disco3.co.uk/forum/post1104598.html?#1104598">view forum post</a></span><br /> MALIBU-RESPONSE Technical (D3) MALIBU-RESPONSE http://www.disco3.co.uk/forum/post1104459.html?#1104459 2013-05-15T23:17:59Z 2013-05-15T23:17:59Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=25927" target="_blank">MALIBU-RESPONSE</a><br /> Subject: ride height adjustment<br />Posted: Thu May 16 2013 12:17am (GMT 1)<br /><br /><span class="postbody"> Hi, i have a disco 3 in my workshop that i need to adjust the ride height on. It is not level and sits 30mm lower on the left side rear and 20mm on the front. I have SDD IDS but have not used it before to adjust ride heights. When i try to enter the vehicle heights on each corner it goes to an error screen and wont let me change anything. Am i doing it wrong? Any pointers would be great. <br /> <br /> Thanks <br /> Dan<br /><br /><a href="http://www.disco3.co.uk/forum/post1104459.html?#1104459">view forum post</a></span><br /> grzesiul Technical (D3) grzesiul http://www.disco3.co.uk/forum/post1104328.html?#1104328 2013-05-15T18:31:04Z 2013-05-15T18:31:04Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=4334" target="_blank">grzesiul</a><br /> Subject: hissing<br />Posted: Wed May 15 2013 7:31pm (GMT 1)<br /><br /><span class="postbody"> i had belts done and car developed weird hissing sound coming from engine bay noticeable on both sides of the vehicle and very prominent on idle <br /> <br /> it is definitely not turbo whistle as sound is located low <br /> best place to listen to it is wheel wells <br /> <br /> any ideas what might that be??? <img src="http://www.disco3.co.uk/forum/images/smiles/icon_eek.gif" alt="Shocked" title="Shocked" class="emoticon" border="0" /><br /><br /><a href="http://www.disco3.co.uk/forum/post1104328.html?#1104328">view forum post</a></span><br /> Disco_Mikey Technical (D3) Disco_Mikey http://www.disco3.co.uk/forum/post1104296.html?#1104296 2013-05-15T17:31:00Z 2013-05-15T17:31:00Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=2622" target="_blank">Disco_Mikey</a><br /> Subject: TDV6 In-Tank fuel pump....<br />Posted: Wed May 15 2013 6:31pm (GMT 1)<br /><br /><span class="postbody"> Is there anyone on the site who is good at matching part numbers? Had a broken D3 in this week with a dead LPFP, and a replacement from Land Rover is way over £700 <img src="http://www.disco3.co.uk/forum/images/smiles/icon_eek.gif" alt="Shocked" title="Shocked" class="emoticon" border="0" /> <br /> <br /> <a href="http://s8.photobucket.com/user/Discomike17786/media/20130513_120929_zpsb7369bde.jpg.html" target="_blank" class="postlink"><div align="left"> <table border="0"> <tr> ...<br /><br /><a href="http://www.disco3.co.uk/forum/post1104296.html?#1104296">view forum post</a><br />_________________<br /><span style="font-weight: bold"><a href="http://ow.ly/eDLWD" target="_blank" class="postlink">How To-Body Removal</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/eDM4v" target="_blank" class="postlink">How To-TDV6 Timing Belts</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/eDLOI" target="_blank" class="postlink">How To-Replace AMK Suspension Compressor</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/iAHfM" target="_blank" class="postlink">How To - EPB repair/Unjam + Relatch</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/eDLYR" target="_blank" class="postlink">How To-F. Lower Ball Joint</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/eDLTc" target="_blank" class="postlink">How To-Autobox Gearlever Pivot</a></span> <br /> <br /> <span style="font-weight: bold"><a href="http://ow.ly/eDMaz" target="_blank" class="postlink">How To-Replace EGR Valve</a></span></span><br /> Pikeykev Technical (D3) Pikeykev http://www.disco3.co.uk/forum/post1104256.html?#1104256 2013-05-15T15:44:08Z 2013-05-15T15:44:08Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=23465" target="_blank">Pikeykev</a><br /> Subject: Air Conditioning Leak<br />Posted: Wed May 15 2013 4:44pm (GMT 1)<br /><br /><span class="postbody"> Had the infamous AC leak. Following advice on here, fault traced to the two pipes under the car just behind the front wheel arch. Took it to a local AC specialist (Bee - Cool) in Burton Latimer near Northampton and he did a top notch repair. Good news is, having spoken to him, anyone who mentions the Disco 3 forum will be given a 5% discount! Normal service is around £50, but is much more thorough than Halfords. <img src="http://www.disco3.co.uk/forum/images/smiles/icon_thumbs.gif">...<br /><br /><a href="http://www.disco3.co.uk/forum/post1104256.html?#1104256">view forum post</a><br />_________________<br />Kevin <br /> <br /> 2006 TDV6 HSE (Bluetooth mod, Front and internal LED (HIDS4U)) <br /> 110 TD5 Rack, winch, hd springs, snorkel, tree sliders, re-mapped</span><br /> d57san Technical (D3) d57san http://www.disco3.co.uk/forum/post1104225.html?#1104225 2013-05-15T14:08:03Z 2013-05-15T14:08:03Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=4565" target="_blank">d57san</a><br /> Subject: Particulate filter - Disco yesr 2005<br />Posted: Wed May 15 2013 3:08pm (GMT 1)<br /><br /><span class="postbody"> I am planning to drive around in Germany for holiday reasons and in many German cities they require a green environment label, and the model I have can only get a yellow label since there are no particulate filter. <br /> <br /> Does any know if there can be installed one in my Discovery 3 TDV6 year 2005, and if yes, where to buy it ? <br /> <br /> Thanks in anvance.<br /><br /><a href="http://www.disco3.co.uk/forum/post1104225.html?#1104225">view forum post</a></span><br /> nickprice Technical (D3) nickprice http://www.disco3.co.uk/forum/post1104124.html?#1104124 2013-05-15T08:04:54Z 2013-05-15T08:04:54Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=14484" target="_blank">nickprice</a><br /> Subject: New engine and now one time black smoke discharge?<br />Posted: Wed May 15 2013 9:04am (GMT 1)<br /><br /><span class="postbody"> Hey guys, I had a new engine fitted in my Disco about a month and a half ago. I just got it back from having its APK done (the Dutch version of a MOT). The guy in the garage (LR dealership) told me that during the emissions test the car belched out a huge cloud of black smoke - so much that it covered the entire road outside the garage. They repeated the emissions test and everything was fine and it passed. His advice was to take the car back to where the engine was fitted...unfortunately...<br /><br /><a href="http://www.disco3.co.uk/forum/post1104124.html?#1104124">view forum post</a><br />_________________<br />D3 SE with Cooper LTZ 285/60/R18, IID Tool, ProSpeed Rock and Tree Sliders, RLD Sump Guard, ProSpeed Compressor Guard, Traxide USI-160 Dual Battery System with Optima Yellowtop, Autohome Black Storm Airtop (Medium), Frontrunner ladder, Rotopax fuel cans, custom sliding boot.</span><br /> Maxarn58 Technical (D3) Maxarn58 http://www.disco3.co.uk/forum/post1103840.html?#1103840 2013-05-14T17:10:41Z 2013-05-15T20:25:11Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=18580" target="_blank">Maxarn58</a><br /> Subject: The Suspension &quot;fart&quot; is absent<br />Posted: Tue May 14 2013 6:10pm (GMT 1)<br /><br /><span class="postbody"> Hi Guys. <br /> <br /> I have a problem.. <br /> <br /> On my Brothers D3, when he starts up, the car &quot;farts&quot;, and when the reservoir for the <br /> suspension is filled, it farts again.. <br /> <br /> My car doesn´t.. <br /> It´s a RRS MY2006, so it´s more or less the same car as the D3, <br /> give or take a few cosmetic differencies.. <br /> <br /> I have bought the &quot;valve repair kit&quot; LR020590, <br /> and tried to fit it, but couldn´t get the...<br /><br /><a href="http://www.disco3.co.uk/forum/post1103840.html?#1103840">view forum post</a><br />_________________<br />RRS MY2006 HST</span><br /> paulJ1 Technical (D3) paulJ1 http://www.disco3.co.uk/forum/post1103694.html?#1103694 2013-05-14T12:19:58Z 2013-05-14T12:19:58Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=5968" target="_blank">paulJ1</a><br /> Subject: Acceleration Lag, Black smoke and tinkling noise....<br />Posted: Tue May 14 2013 1:19pm (GMT 1)<br /><br /><span class="postbody"> I have a 04 plate, one of the original press Launch fleet D3's, now done 125,000miles. <br /> <br /> When i was in the Alps ate easter i noticed that there was a acceleration lag when putting foot down when coming out of hairpins, and then at the weekend i towed the caravan for the first time this year, and some black smoke, especially on the drivers side exhaust.... <br /> <br /> Finally, reading on here, i also get a tinkling noise on start up, and when lifting off the gas... <br>...<br /><br /><a href="http://www.disco3.co.uk/forum/post1103694.html?#1103694">view forum post</a><br />_________________<br />Got our Disco... Love it.....</span><br /> m22 gtr Technical (D3) m22 gtr http://www.disco3.co.uk/forum/post1103357.html?#1103357 2013-05-13T20:20:08Z 2013-05-13T20:20:08Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=23997" target="_blank">m22 gtr</a><br /> Subject: Hesitation on acceleration help please.<br />Posted: Mon May 13 2013 9:20pm (GMT 1)<br /><br /><span class="postbody"> Hi all wondered if you could help have an 05 disco tdv6 manual the problem only occurred recently and doesn't happen all the time, basically first gear foot down no power then all of a sudden it hits you this is the same in every gear takes ages to get up to speed and there would be no chance of trying to overtake anyone. Then the car can run as normal, any help mic appreciated as its very annoying, thanks.<br /><br /><a href="http://www.disco3.co.uk/forum/post1103357.html?#1103357">view forum post</a></span><br /> eck Technical (D3) eck http://www.disco3.co.uk/forum/post1103266.html?#1103266 2013-05-13T18:45:47Z 2013-05-13T18:45:47Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=10898" target="_blank">eck</a><br /> Subject: It Wont Rev<br />Posted: Mon May 13 2013 7:45pm (GMT 1)<br /><br /><span class="postbody"> As per title when the car is started up just wont rev up for a good 10secs or so, foot flat to floor. <br /> The problem seemed to be worse in the colder temps. <br /> It does get better once there is a bit of heat in the car but still not 100%, not ideal when pulling out of junctions etc <br /> <br /> Its in the local garage right now but no obvious cause found, hopefully a friend with a computer can help tomorrow <br /> <br /> <br /> Any clues folks??????<br /><br /><a href="http://www.disco3.co.uk/forum/post1103266.html?#1103266">view forum post</a></span><br /> unoost Technical (D3) unoost http://www.disco3.co.uk/forum/post1103005.html?#1103005 2013-05-13T11:30:44Z 2013-05-13T11:30:44Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=18916" target="_blank">unoost</a><br /> Subject: Smell/ smoke (help!)<br />Posted: Mon May 13 2013 12:30pm (GMT 1)<br /><br /><span class="postbody"> Hello, <br /> <br /> I have an issue with my D3 (2009), and hope some of you can help me figure out what it is… <br /> <br /> The issue is: <br /> When the car is pulling a heavy trailer or drives up a couple of hills, when I stop it comes a burnt smell and sometimes a little smoke from the back of the engine. The temperature is normal, no faults and I don’t feel any loss of power….. (It has been this way for a couple of months now) <br /> <br /> Does anyone have any...<br /><br /><a href="http://www.disco3.co.uk/forum/post1103005.html?#1103005">view forum post</a></span><br /> pfermer Technical (D3) pfermer http://www.disco3.co.uk/forum/post1102335.html?#1102335 2013-05-11T21:50:41Z 2013-05-11T21:50:41Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=25196" target="_blank">pfermer</a><br /> Subject: Brake pedal sinking following disc &amp; pad change<br />Posted: Sat May 11 2013 10:50pm (GMT 1)<br /><br /><span class="postbody"> Hi, <br /> <br /> I changed the front pads and disks today but have no idea if what I'm experiencing is as of a result of something I have done or whether it has always been like it. <br /> <br /> Following changing the pads I expected to have to pump the brakes back up bit and just wanted to test everything felt ok so I pushed long and hard on the brake pedal and following hitting the brake point with continued pressure it continued to slowly sink for a reasonable way. Drove it...<br /><br /><a href="http://www.disco3.co.uk/forum/post1102335.html?#1102335">view forum post</a></span><br /> NJSS Technical (D3) NJSS http://www.disco3.co.uk/forum/post1102133.html?#1102133 2013-05-11T15:32:43Z 2013-05-11T15:32:43Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=6287" target="_blank">NJSS</a><br /> Subject: Freeing seized components - nut, bolts &amp; glow plugs<br />Posted: Sat May 11 2013 4:32pm (GMT 1)<br /><br /><span class="postbody"> There is an interesting article in<span style="font-weight: bold"> MGTalk</span> - the newsletter of the SouthEastern T Register in Atlanta Ga. <br /> <br /> They carried out tests on a series of rusted nuts, and recorded the torque required to release them using a variety of penetrating oils; the results were:- <br /> <br /> <br /> No oil used 516 ft lbs <br /> WD 40 238 <br /> PB Blaster ...<br /><br /><a href="http://www.disco3.co.uk/forum/post1102133.html?#1102133">view forum post</a><br />_________________<br />09 MY Discovery 3 Manual <br /> MG B GT V8 <br /> Jaguar XK150 DHC <br /> Evante 140 TC <br /> Past LRs - Multiple FFRs, Discos &amp; a Series I - Petrol &amp; diesel</span><br /> stew 46 Technical (D3) stew 46 http://www.disco3.co.uk/forum/post1102102.html?#1102102 2013-05-11T14:46:52Z 2013-05-11T14:46:52Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=18235" target="_blank">stew 46</a><br /> Subject: How to ? Upper tail gate number plate light cover<br />Posted: Sat May 11 2013 3:46pm (GMT 1)<br /><br /><span class="postbody"> Trying to fit rear ladder , how does the plastic cover come off <img src="http://www.disco3.co.uk/forum/images/smiles/icon_question.gif" alt="Question" title="Question" class="emoticon" border="0" /> <img src="http://www.disco3.co.uk/forum/images/smiles/icon_question.gif" alt="Question" title="Question" class="emoticon" border="0" /> many thanks stew <img src="http://www.disco3.co.uk/forum/images/smiles/icon_thumbs.gif" alt="Thumbs Up" title="Thumbs Up" class="emoticon" border="0" /><br /><br /><a href="http://www.disco3.co.uk/forum/post1102102.html?#1102102">view forum post</a><br />_________________<br />------------------------------------------------- <br /> if you cant hold on dont let go , it ill come in handy for something even if you never use it. <br /> D3 SE 05, <br /> 110 s wagon 300 tdi SOLD <br /> h top transit <br /> crew cab transit <br /> transit connect <br /> ausa dumper, muck truck . <br /> peljob 2.5 digger <br /> 06 L 200 crew cab</span><br /> discoBizz Technical (D3) discoBizz http://www.disco3.co.uk/forum/post1102048.html?#1102048 2013-05-11T11:47:44Z 2013-05-11T17:48:15Z Author: <a href="http://www.disco3.co.uk/forum/profile.php?mode=viewprofile&u=4904" target="_blank">discoBizz</a><br /> Subject: Help please: battery, alternator or both<br />Posted: Sat May 11 2013 12:47pm (GMT 1)<br /><br /><span class="postbody"> Hiya all! Been ages, I know, will elaborate once on a proper keyboard... <br /> <br /> Car died a few minutes ago (waiting for recovery), all lights came on, then all blank (and engine stopped). Torque did report voltage at only 11.1V at the control module and dropping (had the ODB plugged in after having to jump-start this morning from the Optima - now also at just under 11V...) <br /> <br /> So, alternator seems to have packed it, possibly battery too... remember reading about...<br /><br /><a href="http://www.disco3.co.uk/forum/post1102048.html?#1102048">view forum post</a><br />_________________<br />==&gt; <a href="http://www.disco3.co.uk/forum/topic50196.html" target="_blank" class="postlink"><span style="color: Green">Guide - Inexpensive AV Modification</a></span> <br /> ==&gt; <a href="http://www.disco3.co.uk/forum/topic53320.html" target="_blank" class="postlink"><span style="color: Green">Guide - Extend the multimedia of your Discovery III (September 2011, v1.2 uploaded)</a></span></span><br />