Moo
D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 13912
|
My EPB doesn't work when i pull the switch when the engie is running and I need to use it but it comes on when i switch the car off. However, it does turn the brake off when i pull away after starting the engine.
Any ideas? I really need it around Bath, we have many hills!
|
26th May 2011 6:53 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Sounds like the switch is faulty. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
29th May 2011 8:29 am |
|
|
mrandmrsh
Member Since: 25 Sep 2008
Location: Holmfirth
Posts: 487
|
Bodsy wrote:Sounds like the switch is faulty.
One of the less painful EPB problems I would think
C 2012 Defender 110 XS Utility 2.2
2012 D4 Commercial 255 8-speed, Active diff, lots of extras on order, comes Sept - ORDER CANCELLED (isn't divorce expensive....?)
2008/08 D3 HSE G4 - part exchanged for the 110
1987 110 CSW with 200 Tdi (now gone)
2007/57 D3 TDV6 HSE - NOW GONE owned 1/oct/08 to 31/dec/09
2007 Seat Altea Freetrack4 170 tdi (wife's car, wife now gone!)
|
29th May 2011 8:30 am |
|
|
Discoed
Member Since: 16 Jun 2010
Location: Yorkshire
Posts: 1020
|
Just to piggy back on this I have a 2005 manual but the EPB does not release automatically when I pull off, can this be enabled on my 05 MY?
|
29th May 2011 8:59 am |
|
|
bp
Member Since: 06 Jan 2010
Location: Stuck On The High Road
Posts: 1325
|
yes I think some one wiv a multi vehicle fault mate can enable it for you Don’t worry it is supposed to sound like that...honest
|
29th May 2011 10:01 am |
|
|
Moo
D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 13912
|
Thanks Bodsey, it's what I'd hoped.
Is it a straightforward job?
|
29th May 2011 10:29 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
ISTR it's just one Torx screw and then lift it up. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
29th May 2011 10:38 am |
|
|
Moo
D3 Decade
Member Since: 13 Aug 2010
Location: Wiltshire
Posts: 13912
|
Thanks. A call to Nick on Tuesday then.
|
29th May 2011 10:53 am |
|
|
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
|
Didn't someone on here rescue a dodgy EPB switch with a liberal application of contact cleaning spray?
|
29th May 2011 8:50 pm |
|
|