Member Since: 13 Jun 2016
Location: Dalgety Bay
Posts: 817
Stupid question probably --- Rear Discs
Does the whole rear end of the car need to come up to remove rear discs ? Can I lift one side at a time ? Need to get them off and cleaned, possibly adjusted but hoping a clean is enough so I can get shot of the flashing amber and red warning lamps.
1st Feb 2019 12:10 pm
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1372
You can do one side at a time.2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
1st Feb 2019 12:27 pm
Ali1971
Member Since: 13 Jun 2016
Location: Dalgety Bay
Posts: 817
Ok thanks, will give that a shot. I would think to adjust them you would need to have the whole rear axle up ?
1st Feb 2019 12:33 pm
Davethegeo
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 879
Yes. To adjust the parking brake the wheel has to be off but can do just one side at a time.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
1st Feb 2019 12:36 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6902
Thinking back, with the 8 speed, I think you need to release the gearbox using the red handle under the cup holders to turn individuallyJoined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
1st Feb 2019 5:57 pm
Ali1971
Member Since: 13 Jun 2016
Location: Dalgety Bay
Posts: 817
1st Feb 2019 5:59 pm
galwaygreen
Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
think theres bodsys brake bible on here if you search..or search EPB
1st Feb 2019 6:47 pm
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6902
To adjust you need to turn the wheels. When you stop the 8 speed it goes back to park automatically. To select neutral you need to do it manually with the red handle
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
1st Feb 2019 8:53 pm
Ali1971
Member Since: 13 Jun 2016
Location: Dalgety Bay
Posts: 817
Ok....... pulling the cable will certainly allow me to remove the discs?? Resetting everything? Does it do it itself and I’m also thinking that actually making any adjustments to the epb following Bodsy guide won’t work?? Due to the 8spd box ?? Going to google again
2nd Feb 2019 9:59 am
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6902
To remove the discs you will probably need to turn them to align the hole with the tensioner to back it off as per bodsys instructions.
You will need to leave the epb off but also put the gearbox in neutral. To do that you remove cup holders and you turn the red lever (first time I sat there pulling it and wondered why nothing happened ),Joined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
2nd Feb 2019 10:38 am
OvalAutos
Member Since: 28 Dec 2018
Location: Cradley Heath
Posts: 382
To do it properly, you need to use the IID tool to put the brakes in service mode. This makes sure that the EPB is fully retracted and the cables at their most slack.Joe
2nd Feb 2019 10:43 am
Ali1971
Member Since: 13 Jun 2016
Location: Dalgety Bay
Posts: 817
Yep but without the tool........ so really if I get it in neutral with the red lever then follow Bodsys guide from there? Rather than yank the cable ?
2nd Feb 2019 11:56 am
Dave T
Member Since: 03 Jul 2009
Location: Glasgow
Posts: 6902
Yanking the cable with the loop only releases the epbJoined the BMWX5 45e group
1994 Defender 90
2015 RRS Corris Grey/Black roof
2016 D4 Graphite Santorini Black
2012 D4 XS Orkney Grey
2005 D3 S Maya Gold
Convoy for Heroes 2011
2nd Feb 2019 12:18 pm
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 762
Ali1971 wrote:
Yep but without the tool........ so really if I get it in neutral with the red lever then follow Bodsys guide from there? Rather than yank the cable ?
am I missing something here ? if you turn the ignition on and select neutral leave the ignition on and adjust your handbrake ??please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
2nd Feb 2019 12:52 pm
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1372
Just make sure you pull the handbrake fuse so there's no risk it can be activated while you have it in bits (or your fingers are in it)2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum