Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
Suspension height sensor test ?? - SORTED
I've been struggling to diagnose my suspension issues for some months now and have pretty much just been living with it as its only a amber warning.
The time has now come to get it sorted once and for all so...............
Does anyone know of a test procedure to ensure the height sensors are working OK and within parameters ??
Main error code is C1130-66 (too many transitions) - system has no leaks, compressor been checked and working OK, Dryer cleaned, front valve block cleaned.
Live data from the IID would seem to indicate a RL and/or RR corner valve problem but I just want to check and ensure the height sensor(s) is behaving itself before I strip the rear valve block.
Click image to enlarge
Unless I'm bonkers of course
TIA
Steve
Last edited by maplecottage on 24th Oct 2017 1:46 pm. Edited 1 time in total
8th Aug 2017 2:43 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13598
have actually just been chatting about that if it's any use on page 2
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
After dealing with intermittent suspension issues for more than 18 months now, I decided to bite the bullet and strip the rear valve block. Bingo - more white powder than a Columbian drug dealer
Cleaned, rebuilt and hey presto, no more bings or bongs, no amber lights, no fault codes and..............no more flat battery !!
That's the strange benefit and I can only assume that continual suspension adjustments while parked were leading to an extra drain on the battery.
Happy days
Click image to enlarge
24th Oct 2017 1:52 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum