firthy77
Member Since: 03 Dec 2016
Location: Stockport
Posts: 94
  
|
| Thinking of fitting rear view camera |
|
I want to put a rear view camera on MY13 D4, does anyone know what I would need for this i.e.
1) What wiring exists already on the car
2) What camera
3) Would I nee any extra leads etc
cheers
Fred 1968 Series 2A
MY13 D4 XS SOLD
MY12 Freelander XS SOLD
D2 V8 SOLD
D1 300TDi SOLD
90 SW 200TDi SOLD
90 SW Naturally aspirated SOLD
1957 107 Series 1 Pickup SOLD
|
 2nd Feb 2017 9:06 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
I've fitted a significant number of these. You'll need to have it enabled as well.
Wire is there between gearbox and rear roof.
You'll need wiring from camera through tailgate to roof and from screen to gearknob area. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 2nd Feb 2017 9:28 am |
|
|
HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
 
|
I did this mod a couple of years ago. The LR camera list price was over £200 (p/n LR043493) but I was lucky enough to find one on eBay for £75. You also need to replace two sections of loom at the back of the car which provides a power supply from the rear door catch and provides a feed from the camera to the video cable which you should find in the roof lining. This video cable runs to under the centre consul by the gear knob. You then need a cable to run from the centre consul up to the back of the the back of the screen. It will then need enabling.
Quite a lot of info on this thread but I suggest you do some more searching on the forum
http://www.disco3.co.uk/forum/topic87553.html?highlight=Camera
|
| 2nd Feb 2017 9:42 am |
|
|
