Member Since: 03 Oct 2011
Location: Northampton
Posts: 12
Throttle pedal assembly
Hi can anyone please tell me that if I install a new throttle pedal assembly will It need To be coded ito the car. Or will it be just a straight swop.2005 Discovery 3 HSE
23rd Aug 2019 4:32 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771
My understanding is that it just send signals to the throttle body - but there must be a set procedure for it. That is, when closed throttle body should be at idle and when flat to the boards throttle body should be wide open
24th Aug 2019 2:21 am
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Chnaged a few on trucks and they are plug and play, if it were mine I would try it.
24th Aug 2019 3:51 am
G.bav
Member Since: 03 Oct 2011
Location: Northampton
Posts: 12
Thank you for your replies, I was asking as there is a mobility peddle swap unit installed which is attached to the throttle peddle arm but the pad has been cut off of the original peddle. I have sourced a second hand peddle unit but was not sure that if I changed it over it would work correctly. I will give it a try and see what happens.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum