tonywolf
Member Since: 19 Apr 2013
Location: Plymouth
Posts: 312
  
|
Thanks Robbo have been in touch with the chap to establish the. year and it's state as the photo aren't that brilliant, the bottom trim looks scuffed, I take it all the plastic lower half is individually available from LR?
Got my eye on some D4 wings on eBay quite pricy 
Reference the PDC/fog lights and the loom. I take it the loom is specific D4 loom? So you can't utilise the D3 loom, due to the PDC being a different size?
Does the D4 loom fit into the D3 vehicle loom, when fitting the bumper without any bother? Regards Tony
|
 29th Dec 2013 12:02 pm |
|
|
|
|
tonywolf
Member Since: 19 Apr 2013
Location: Plymouth
Posts: 312
|
Cheers Robbo, instincts tell me to go mad and buy everything in a oner, but I'm going to pace myself and plan to have everything in place to do the conversation in the spring/ summer. Plus with my rotations out the country I don't want to rush the job.
Secured the lights last night for a pricely figure, and to be fair they were always going to be the biggest hit.  Next will be the wings/ plus paint. 
So do powerful uk have these on the website or is it something that needs negotiating with Simon? What sort of cost are we talking about, if you don't mind disclosing  Regards Tony
|
| 29th Dec 2013 7:54 pm |
|
|
|
|
Discomarc
Member Since: 17 Oct 2013
Location: Cheshire
Posts: 84
 
|
I'll be doing the conversion this weekend, managed to source all the bits over the last couple months
Then it will be off to the paint shop, getting them to blow it into the doors and do all the plastic trims
I'll get some pictures once it's done.
Robbo be ready for lots of pms!!
Cheers
Marc
|
| 29th Dec 2013 9:54 pm |
|
|
|
|
Discomarc
Member Since: 17 Oct 2013
Location: Cheshire
Posts: 84
|
Drivers oem and powerful uk passenger side
|
| 30th Dec 2013 12:05 am |
|
|
tonywolf
Member Since: 19 Apr 2013
Location: Plymouth
Posts: 312
|
Good stuff cheers Robbo. I noticed on their site that they have 2010 RRS LED fog lights, are these the same size as the 2010 D4 fogs Are you aware of any technical issues using these instead of the standard ones Regards Tony
|
| 30th Dec 2013 7:11 am |
|
|
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
|
robbo D4 side/wing vents come off easy, lift bonnet and shine a tourch down the hole on top of wind, you will see the vent clips, use a long screw driver to push the clips down and hey presto they are off. MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
| 30th Dec 2013 8:52 am |
|
|
|
|
|
|
|
|
|
|
jonnybgud
Member Since: 18 Dec 2013
Location: Leicestershire
Posts: 397
|
Robbo770 cracking guide, I'm looking to do something similar myself and I wondered if you happen to have a copy of the template you made to trim the front wings
|
| 31st Mar 2014 4:18 pm |
|
|
|
|
