Member Since: 21 Dec 2007
Location: Norfolk
Posts: 198
windows
Hi there,
I seem to have developed a problem with my front near side window.
When I try to close it via the drivers door switches or the passenger side door switch. I have to hold the switches in the up position to get the window to fully close, where as all other windows will close just by pulling the switch up and then releasing it as per instructions in the handbook.
Is this a software problem or something more sinister.
Sorry this should have been posted under D4, (I must have been having a senior moment)
Billy BNothing is foolproof as the ingenuity of fools is endless.
2012 Discovery 4 HSE Luxury
16th Mar 2014 10:57 am
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
If it's anything like the D3, it probably just needs "re-calibrating" so the controller gets to know the motor stall current.
It's usually just a matter of pressing the switch to wind the window to it's fully closed position and holding it pressed for a further 5 seconds or so once closed.Clive
16th Mar 2014 11:49 am
Billy B
Member Since: 21 Dec 2007
Location: Norfolk
Posts: 198
Thanks for that snippet of info crwoody,
Got it to work after five attemps.
Problem sorted.
Billy BNothing is foolproof as the ingenuity of fools is endless.
2012 Discovery 4 HSE Luxury
16th Mar 2014 1:22 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Sometimes happens if the battery has been disconnected, replacement or off-car charging etc. or just a glitch
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum