Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Those DLR's look excellent Tom tell me more
27th Apr 2014 9:09 am
tomp1418
Member Since: 07 Apr 2014
Location: Lancashire
Posts: 158
I just bought them off eBay about £15 then when I detangoed I put them in following the silver light reflector had to do a little cut so they ran true right round and drill a hole to put the wire through to the back of light and into bonnet area. There are connectors there so I can remove if I need to pull light out and then to the fuse box to work when ignition
Is on.
Can take some more pictures close up if you wantDiscovery 4
27th Apr 2014 9:19 am
tomp1418
Member Since: 07 Apr 2014
Location: Lancashire
Posts: 158
Fitted new discs and pads and wear indicator today with thanks to advance factors. 100% better now already also took the advice off another thread to put a little copper grease where the handbrake shoes touch the casing. Sounds quieter and I've also took advantage of all the wheels being off to paint the callipers, only black but tidies it all up.Discovery 4
27th Apr 2014 4:07 pm
jelly
Member Since: 27 Mar 2014
Location: Cornwall
Posts: 79
Looking nice
27th Apr 2014 5:11 pm
tomp1418
Member Since: 07 Apr 2014
Location: Lancashire
Posts: 158
Click image to enlarge
Fit 3 of these tonight until the last locking wheel nut sheared in 2 put a stop to the fun. Discovery 4
28th Apr 2014 9:44 pm
tomp1418
Member Since: 07 Apr 2014
Location: Lancashire
Posts: 158
Just a quick question, could I fit a d4 front bumper but leave the rest of the front end the d3 like lights wings and grillDiscovery 4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum