Danbhardy
Member Since: 06 Apr 2019
Location: Chorley
Posts: 74
|
Grinding noise from osf wheel |
|
When turning we are getting a grinding type noise from the osf wheel. It’s doing it when you accelerate into a corner but not when you coast into a corner and accelerate out. Also it seems to be at a higher speed as opposed to low speed manoeuvres (it does it on roundabouts but not when parking for example).
Please tell me it’s not expensive lol
|
4th May 2019 11:27 am |
|
|
latnutgub
Member Since: 25 Aug 2011
Location: Huddersfield
Posts: 170
|
Check wheel bearings ? That means jack the wheel station up and rock the wheel top and bottom to check for play. If its done 50K + miles its likely they need doing.
|
4th May 2019 2:29 pm |
|
|
Danbhardy
Member Since: 06 Apr 2019
Location: Chorley
Posts: 74
|
It’s done about 175k lol
|
4th May 2019 2:45 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
|
If it was wheel bearing thta was that far gone I would say the abs warning light would be on
5 minute job to jack it up and check
|
4th May 2019 2:52 pm |
|
|
latnutgub
Member Since: 25 Aug 2011
Location: Huddersfield
Posts: 170
|
Without knowing a bit more history, at that mileage the running gear needs a good check. Wheels off, check brake discs and pads for uneven wear.
|
4th May 2019 2:59 pm |
|
|