Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
Emergency door lock
Ok , a last year I think I broke the mechanism for the lock , I'm assuming it's on a cable or a rod ? But how to I get to it ? I've got the inner door of , I need to do this as my central locking can be a bit bit temperamental after some bad weather
-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 3:21 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
To remove the emergency lock remove the cover from the lock, remove access plug on inside edge of door inline with lock, loosen single torx screw and the lock comes out from the front of the door. Effectively the cylinder is just a small module that mates with the latch mechanism inside the door.
Simples.Land Rover - Turning Drivers into Mechanics Since 1948
Last edited by Robbie on 8th Nov 2014 3:33 pm. Edited 1 time in total
8th Nov 2014 3:27 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
Cheers Robbie , I've got the lock out now , but how do I get the other bit out ? -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 3:33 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 3:38 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Good luck!
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
that was a bit of a job
I think it's the mechanism not the barrel , bet that's going to cost a few £££££ -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 4:34 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3637
Too bad it's the weekend Land Rover have seen this thread and have decided to treble the price of the part from 9am on Monday
8th Nov 2014 5:19 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 5:20 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Pretty much done that already. The door latches used be £30 odd and I grumbled when they hit £40 odd. I shudder to think what price they are now given their current parts price policy.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 09 Mar 2013
Location: Dorset
Posts: 63
£80 with forum discount from Yeovil LR. I had to buy one last week when the clean the motor trick didn't work.
8th Nov 2014 5:59 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
Ok , should this lock be spring loaded ??
-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
8th Nov 2014 7:13 pm
Kingmav66
Member Since: 20 Jul 2010
Location: Gloucestershire
Posts: 1349
Stew, good luck putting that lot back together. I did mine a couple of years ago, what a pig of a job. You need tiny hands with long double-jointed fingers.
8th Nov 2014 10:59 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
stew 46 wrote:
Ok , should this lock be spring loaded ??
Well I'll try and put back together today as need to tow the digger tomorrow , but still not sure if the lock should be spring loaded ?? , because mine is not , I assume this is what's broken ? -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
9th Nov 2014 11:10 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
Still struggling to find out if the emergency door lock should be spring loaded ?? -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
that was a bit of a job 
Land Rover have seen this thread and have decided to treble the price of the part from 9am on Monday 
as need to tow the digger tomorrow , but still not sure if the lock should be spring loaded ?? , because mine is not , I assume this is what's broken ? 
