Member Since: 05 May 2016
Location: Gateshead
Posts: 473
EPB Help
I've been reading all the posts on jammed epb modules my heads battered mine does not apply the brake it squeals flashes up solid Amber epb and flashing red epb on dash
I have fitted new shoes to the correct adjustment every thing worked until bedding them in
The fault code is c1a43-00(Fb) motor failure electrical error h- bridge using Iid tool and it comes up epb position undefined
Does this mean the module is in the jammed position the old shoes were down to metal on the passenger side
Help please
Henda
18th May 2016 9:13 pm
Henda
Member Since: 05 May 2016
Location: Gateshead
Posts: 473
Giving Up
Well had a look at the epb module
I am confident I can do the job but I am uncomfortable with lying on my back with the disco on axle stands and on a slope
Hate admitting defeat but unless I can use a pit or a ramp it's going to the garage
Unless there's some one near Newcastle who would like to come and do it and give the disco new belts and a sevice if the want
Cheers Henda
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum