Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Fitting Anderson connector in MY15 grill
On my last D4 I fitted an Anderson connector ( for jump starting ) in the front grill .
When I sold it I removed all the bits so I could fit it on the new one .
Like this
So today I went to fit it only to find the slatts on the grill are now too close together .
There is just about room to squeeze a couple of strobes in the top .. But no chance with the Anderson ( not unless I changed to a smaller one )
Here's my solution
Cut out the badge
Make a bracket
Line it all up
Get a Anderson dirt protector and an old badge ( type that goes on FFRR rear ) part number DAH500270
Pop it in place
Put the badge back on
Just spraying the connector and bracket .. Will update with a final pictureG4 Gone ...but not forgotten
Last edited by wiggs on 22nd Nov 2014 11:47 am. Edited 2 times in total
Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
19th Nov 2014 3:52 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Plasti dip is dry now
Thought I'd put in a new fuse holder as well
G4 Gone ...but not forgotten
19th Nov 2014 4:10 pm
BMW
Member Since: 17 Nov 2007
Location: East Staffs
Posts: 47
That kept you busy after I left yesterday! Looks good!
19th Nov 2014 5:26 pm
Bradders
Member Since: 21 Oct 2014
Location: Ashford, Kent
Posts: 126
It's little things like that I like 2007 D3 XS Auto 101k
BF Goodrich AT's
RLD black sump guard
LR Spot lamps
Shire Fabrication rock and tree sliders
Prospeed compressor guard
Underbody plating
19th Nov 2014 5:40 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Ade, that looks OEM quality. I am impressed.
I presume there enough clearance between the fuse box lid and the bonnet when closed?
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
BMW .. Yes got the hole cut out after you'd gone .. Done the rest today
Robbie .. Yes it clears no problem .
Will eventually connect the winch into that fuse holder as well .
I will have an emergency metal bar to fit the fuse holder .. Just I case I need more power than the 150 amp fuse can handle G4 Gone ...but not forgotten
19th Nov 2014 5:53 pm
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
may make a similar access point for mine
r 
