Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Side mirrors moving in reverse
Yesterday when I reversed into a parking I noticed the two side mirrors move. When I put it into first gear the mirrors flicked back to normal position. Has anybody else had this?
19th Jan 2015 9:24 pm
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 1028
It is a feature on some models I believe
19th Jan 2015 9:27 pm
markwirral
Member Since: 10 Dec 2013
Location: Wirral
Posts: 266
Hi mate , that's perfectly normal, I personally don't like it, you can turn it off in the settings
Regards
Mark
19th Jan 2015 9:29 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
You can turn it off in your settings menu ( rear dip mirrors )G4 Gone ...but not forgotten
19th Jan 2015 9:29 pm
Freebob
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Thanks
19th Jan 2015 9:31 pm
Freebob
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Have any of you installed an inverter to run 240v appliances?
19th Jan 2015 9:33 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
You can adjust them when they dip to any position you like and the system will remember it for next time.
I like it, but not at the default amount of dip. I have them set so I can just see where my rear wheel is when reversing, but high enough to still see rearwards.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Is it easy to remove the Satnav screen and cut the cable to change the functions of the screen?
19th Jan 2015 9:36 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Piece of cake
19th Jan 2015 9:40 pm
Freebob
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Have you done it?
19th Jan 2015 9:41 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Nope.... But had my satnav screen in and out approx 15 times for various reasons
19th Jan 2015 9:59 pm
Freebob
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
Where are the fixings?
19th Jan 2015 10:08 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
You have to pull the H trim off first. Pull quite hard, starting at the bottom. There are four clips here and you may lose some.... If you do, part number is FYC500040.
Next remove 4 philips screws that hold the screen in. You cant miss them.
That's all there is to it
19th Jan 2015 10:12 pm
Freebob
Member Since: 11 Jan 2015
Location: Woking
Posts: 130
The H trim being the cover around the consal?
19th Jan 2015 10:14 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
yes, the cover around the console
Here's a pic of mine with H trim out
You can see the screws at the bottom.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum