Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Speed sensor wires
Having bought a Haynes manual I now find that it doesn't have much on the wiring diagrams that I was hoping to find.I recently replaced the f/o/s speed sensor only to find I'm still getting all the dash lights and fault code ...
Vehicle Dynamic
C1A94-13 (0B) Front right wheel speed sensor circuit - General electrical failure - circuit open
Am I right in my thinking that this is a wire break between the connector in the wheel arch and the connection at the ABS unit itself .If this is the problem,can anyone tell me what colour cable will it be and what pins it will be
Thanks.....john
14th Mar 2015 3:19 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Yep, direct to ABS module pins 9 and 10 (Green and Green/Yellow).
Land Rover - Turning Drivers into Mechanics Since 1948
GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
14th Mar 2015 3:53 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Nice.
8)Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Thanks Robbie and Allan both a big help.
When I loosened the inner arch away I found one of the small wires had come away from the connector.I have carefully put it back into its place and connected the battery and started it up.Still got all the bloody lights on the dash,plugged in my iid tool and cleared all the faults but still got the ABS ,P brake ,hdc off and special programs unavailable .I'll give it a couple of days thought and if it gets too much I can see me talking to Mikey
Thanks for your help guys
John
14th Mar 2015 7:13 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Give it a good session on a battery charger. With all the faffing the battery may have had enough, triggering the failures you see.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Might be worth a try Robbie,this last couple of weeks it's just been getting the odd 5-6 mile trip into town and with messing about with this fault and the fbh too the battery might just be a little on the low side
Fingers crossed again
John
14th Mar 2015 7:20 pm
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Ok ,now that we have charged the battery and done another iid tool scan I'm once again showing the original fault,and now knowing that one of the wires has come adrift of the connector on the actual harness and my attempt at repositioning it into said connector has failed ,can you tell me ,is it possible to repair the connector or is it a replaceable part
Thanks. John
15th Mar 2015 4:13 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
The connector YPC500360 is available to order http://www.lrdirect.com/YPC500360-Connector-Cable.GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
15th Mar 2015 4:19 pm
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Thanks again Allan.
15th Mar 2015 4:22 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
On further investigation it would appear the connector does not include the terminals, but this thread http://www.disco3.co.uk/forum/topic109230.html?view=previous indicates the FBH wire available from the shop could be substituted in place of the original terminal.GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
15th Mar 2015 4:30 pm
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Good find Allan thanks
15th Mar 2015 4:47 pm
Officerdibble777
Member Since: 28 Jan 2015
Location: Fife
Posts: 136
Ok ,where we are now.I purchased 2 FBH wires from Martin,thank you
And a new connector from LR direct .
All newly wired up and no more lights ,bing,bongs and normal business has resumed.
Thank you to all that helped
John
25th Mar 2015 3:25 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
