Member Since: 31 May 2013
Location: Bournemouth
Posts: 207
Door retainer - any idea on name/part number
Photo below of the retaining strut on the drivers side door. The coating has split and now making a horrible bang noise when opening the drivers door.
Any idea on part number or name?
Thanks
Mat
Click image to enlarge
3rd Apr 2015 6:33 pm
Neuon2003
Member Since: 16 Apr 2014
Location: Beverley
Posts: 210
Door check strap?
3rd Apr 2015 6:59 pm
DiscoZack
Member Since: 12 Feb 2015
Location: Cambridge
Posts: 173
Hope this helps.
Cheers, Chris in Cambridge
D3 56 TDV6 Metropolis LE
LH EGR valve replaced, cambelt changed
Amateur Radio Callsign - G6EUI
My other car is a Volvo S60 T5
Previous:
Discovery 2 2.5 Td5 S - 7 seat - Blue
Discovery 2 2.5 Td5 ES - 7 seat - Maroon
Isuzu Trooper 3.2 V6 Auto - Red
Isuzu Trooper 3.2 V6 Manual - Red
IIDTool BT, Nanocon Evo 2
3rd Apr 2015 8:30 pm
brightyuk
Member Since: 11 Apr 2013
Location: Bedworth
Posts: 394
Part number is BDH780070
Do a google search various suppliers.
Hope that helps
Adam
3rd Apr 2015 9:00 pm
mathewdowns
Member Since: 31 May 2013
Location: Bournemouth
Posts: 207
Thanks everyone! Much appreciated, looks like the door card has to come off unfortunately!
3rd Apr 2015 10:42 pm
disco5
Member Since: 23 Dec 2012
Location: birmingham
Posts: 1088
Yes you take it off from inner skin .
Door card off then window motor ,then window actuator 5bolts I think ..
Detach window from actuator push clips 2 of, ease window back up .mite need two people here .
One Holds window up ,one takes window actuator out .... undo the four bots that hold check strap .
Fit new one and re do procedure backwards finished.
5th Apr 2015 9:22 am
markthegad
Member Since: 06 Sep 2009
Location: Newcastle
Posts: 636
Just done one of these, easy way I found was to take the speaker out, 4 screws and a little pull, then plenty room to remove and replace new one
24th Jun 2017 1:01 pm
Crackers
Member Since: 18 Sep 2013
Location: Camberley, Surrey
Posts: 143
Having just done the drivers door check strap on mine I thought I'd add a bit to this post:
1. Door card needs to come off but only one wiring connector, the one to the speaker, needs to be unclipped.
2. No need to remove door actuator cable or any window mechanism parts.
3. With door card unscrewed and unclipped - see the video on YouTube - support weight with a bit of rope over the door frame and tied to external handle.
4. Remove speaker. Plenty of room to now get at the offending part and replace.
Some images and notes:
Offending door check strap:
Click image to enlarge
The outside trim on this is harder to get off than the YouTube video shows. There are 2 clips top and 2 clips bottom
Click image to enlarge
Support door card with rope over door to avoid straining any wires:
Click image to enlarge
Remove this speaker connection:
Click image to enlarge
Remove speaker for access to inner door. Speaker needs gentle seperation from door inner metal skin.
Click image to enlarge
A small ratchet screwdriver such as this is handy for removing & refitting the two lower speaker screws.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
