SpikeUK
Member Since: 21 Sep 2015
Location: Bodmin
Posts: 27
|
2006 D3 2.7 auto HSE.
I have recently been getting all the standard faults and warning lamps that indicate a poorly compressor. So I got myself armed with a seal kit for an Hitachi compressor and set about the job this evening.
On removing the cover I found not an Hitachi, but an AMK compressor. A previous owner must have had problems and had the compressor changed.
I can't seem to be able to find a seal kit for the AMK compressor, is there one? Or must the whole compressor be renewed?
Is the AMK compressor prone to failure? Or should I be looking elsewhere for the failure?
Thanks
|
3rd Feb 2016 8:20 pm |
|
|
|
SpikeUK
Member Since: 21 Sep 2015
Location: Bodmin
Posts: 27
|
Hi Disco_Mikey.
the only one concerning the suspension is
C1130 - Air spring air supply
plus a few about the heater stepper motors, which is strange as the heater seems to be working OK.
That's with my iCarsoft i930.
Last edited by SpikeUK on 4th Feb 2016 12:57 am. Edited 1 time in total
|
3rd Feb 2016 8:41 pm |
|
|
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
|
What kit did you get?
I need one....
|
3rd Feb 2016 8:52 pm |
|
|
|
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
|
Was looking at that one earlier.
Did it look a decent kit?
I think I just really need the piston seals etc...
|
3rd Feb 2016 11:05 pm |
|
|