NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
|
About a couple of years ago I had the usual drivers door won't lock/won't unlock, so replaced the door lock motor. Now it's playing up again, sometimes won't lock, needs a second go.
1. happy at the time, but it was cheapish from eBay (new though)
2. I've always had problems with the speaker in the same door, dodgy wiring in the loom as it goes across the jamb to the door
I'm all for replacing the motor unit again (genuine LR this time from Advanced Factors) but is there a wire that provides the lock signal that is losing continuity in the loom perhaps?
|
3rd Apr 2018 8:34 pm |
|
|