Member Since: 13 Aug 2009
Location: Not London Anymore (or the US for that matter)
Posts: 1923
Michele,
The PCV is under the plastic engine cover on the left side as you look at it. It has 2 Torx 25 (I think) screws. Remove screws, pull up small plastic wire thing (pulls off) unclip the pipe that's attached to the front of the PCV (squeeze and pull), then pull the PCV up. Assembly is the same in reverse. Takes 5 mins. Part is around £25.
Pics:
1 is the PN
2 is the PCV
3 is the location.
PAGODA
14th Aug 2016 12:33 am
michele
Member Since: 07 Jul 2009
Location: gelderland
Posts: 216
Thank you wery much, Pagoda.
14th Aug 2016 8:35 am
bimblephish
Member Since: 21 Jul 2016
Location: Wiltshire
Posts: 272
Many thanks for both the question and the answer (was going to ask similar myself)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
