Member Since: 19 Apr 2007
Location: Cumbria
Posts: 314
Removing Fixed Tow Bar
Hi all,
Getting usual problems in removing my LR Fixed towbar..... long story for removal.....
Battle commenced this afternoon and rain has now stopped play.
Progress so far:
- lowered spare wheel to access bolts for the side struts
- removed the side struts - no drama.
- red key goes in lock and turns fine
- green knob pulls out but doesn't turn very far - loads of WD added....
- may have to find friend with big hammer and drift for the locking pin.....
- can't get the 2 bolts back into the chassis from where the struts connected - bolts turns but don't pick up the thread in the chassis..... - any tips/tricks here please?
Many thanks
JC
10th Jun 2017 7:06 pm
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
Regarding the bolts not engaging, slacken off the nut on the other side of the chassis member and you can move the pin about inside to engage the threads, You can on a D3 not sure if its the same on a D4.
10th Jun 2017 8:37 pm
jc_uk
Member Since: 19 Apr 2007
Location: Cumbria
Posts: 314
Hi again,
This is on a 2007 D3 HSE.
Is it ok to drive with the chassis bolts not installed?
Short distance to someone who can then back in and the rest of the tow bar detached.
Is the bracket they help secure for the weights behind the rear bumper?
Thanks
JC
12th Jun 2017 8:17 am
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
Mass damper weights are not connected to tow bar fixings at all & you can drive with the side bars detached with the fixings
12th Jun 2017 12:05 pm
jc_uk
Member Since: 19 Apr 2007
Location: Cumbria
Posts: 314
Hi,
Not sure I understand that fully.....
I cant get the bolts back in so I'm going to have to drive a short distance without the bolts in place.....
I assume this will be OK.....
Thanks
JC
12th Jun 2017 12:16 pm
jc_uk
Member Since: 19 Apr 2007
Location: Cumbria
Posts: 314
Hi,
More WD-40 plus some help from a friend with a copper hammer and the tow bar is now free and off the vehicle and the chassis bolts are back in.
The tow bar is now ready for redeployment on the next Discovery.....
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum