Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D3)

Wheel weights
Post Reply  Down to end
Page 1 of 1
klacey
 


Member Since: 02 Mar 2005
Location: Swindon
Posts: 17

2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3
Wheel weights

My dealer, T.H. White supplied HSE TDV6 with balancing weights on the outside of the alloy wheels. Can these be fitted on the inside as they spoil the appearance of the car? Is it normal to put weights on the outside of alloys?  
Post #12033rd Mar 2005 9:05 pm
View user's profile Send private message View poster's gallery Reply with quote
simon
  


Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296

United Kingdom 2011 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

My 'S' has them on the outside too.

All my other alloy'd cars have had then inside the rim... maybe its a LR thing or the way the wheels are designed ???

-s  
Post #12043rd Mar 2005 9:12 pm
View user's profile Send private message View poster's gallery Reply with quote
FamilyMan
 


Member Since: 10 Jan 2005
Location: UK
Posts: 119

Hmmm...I noticed that too. I had a volkswagon that had them done the same way and when it came to have the tyres replaced the clamp pealed away the alloy. My Porsche has them on the inside of the wheel which I agree is a much more appealing and practical method. Surely the outside rim is also more vunerable, especially for an off-roader. 2005 TDV6 SE Silver/Black Manual + Alpine  
Post #12053rd Mar 2005 9:48 pm
View user's profile Send private message View poster's gallery Reply with quote
klacey
 


Member Since: 02 Mar 2005
Location: Swindon
Posts: 17

2005 Discovery 3 TDV6 HSE Auto Zambezi SilverDiscovery 3

I received this reply from my dealer concerning wheel weights....
The fitment of wheel weights to the outside of the alloy rim is the standard
fitment from Land Rover and the weights on the vehicle would were fitted
by Land Rover at the factory. Other new vehicles at the dealers including the Range Rover have this fitting. The weights have to be put on the outside rim in order to offer a true balance for that side of the wheel and because of the design of the rims you cannot achieve this with weights on the inside.
Well.......  
Post #12254th Mar 2005 7:43 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26703

United Kingdom 

Mine are on the outside. To be honest, I did'nt know it could be done another way!  
Post #12314th Mar 2005 8:58 pm
View user's profile Send private message View poster's gallery Reply with quote
simon
  


Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296

United Kingdom 2011 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

The weights on my Audi and BMW were bonded / glued to the inside. Guess it depends on the wheel eh ?

-s  
Post #12414th Mar 2005 10:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Ecosse
 


Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889

19" alloys on HSE also has the weights on all wheels clipped to the outside of the rim. Past experienc shows that if they are removed on new tyres being fitted & rebalanced they will leave a mark.  
Post #12464th Mar 2005 11:18 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site