gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
  
|
| [Wanted] RLD 17 inch wheel protector |
|
is for a D3
don't wish to put the spare wheel on yet until i've got one of these protectors
of course don't mind if it needs rubbing down and repainting
thks
|
 13th Feb 2017 4:32 pm |
|
|
JackNorris
Member Since: 06 Jul 2012
Location: Beds/Bucks Border
Posts: 1877
|
They àre quite radical second hand, best to drop uncle ray a message  MY2023 Discovery 5 R-Dynamic 3.0
MY2020 Discovery 5 Landmark 3.0 - SOLD
MY2005 Discovery 3 V8 4.4 HSE - SOLD
MY2019 Discovery 5 SE 3.0 - LR Replaced !
MY2005 Discovery 3 S 2.7 - SOLD
MY2016 Discovery 4 Graphite - SOLD
MY2015 Discovery 4 SE Tech - SOLD
|
| 13th Feb 2017 5:27 pm |
|
|
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23369
 
|
I've got I want to sell. I've used it on 19" & 18" rims.
To be safe, it would be good to verify with Uncle Ray (RLD) that it will fit a 17" rim.
I'll drop him a pm.
2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography
|
| 13th Feb 2017 5:50 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
|
LT
bless u for that 
will wait to hear from u and will be great to get the spare wheel out of my boot
spare now has a new tyre on it and didn't wish to risk putting it underneath without getting a protector plate
going to order a new winch as the cable on mine has been kinked , didn't come with a spare so god knows how long the winch has been sitting there
also got some new stainless steel bolts and nylock nuts already
will be great to tick this off my list
Last edited by gstuart on 13th Feb 2017 6:06 pm. Edited 1 time in total
|
| 13th Feb 2017 5:53 pm |
|
|
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
|
got some new stainless steel bolts and nylon nuts already
I hope you mean nylock nuts! L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
|
| 13th Feb 2017 5:55 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
|
ooopps
yep that's what i meant nylock nuts
dam autocorrect 
|
| 13th Feb 2017 6:06 pm |
|
|
Marmoset
Member Since: 28 May 2007
Location: Cheshire
Posts: 281
|
LT, If that doesn't fit gstuarts 17" rims then I may be interested in it for my 19"s 2011 D4 SDV6 HSE
2008 D3 TDV6 HSE
2005 D3 V8 SE - left in Oz..
|
| 14th Feb 2017 9:50 am |
|
|
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
|
Just buy any size one that fits your budget, then cut it to size. Sounds odd, but it's really easy, just a jigsaw with metal blade fitted.
It's what I had to do after buying the wrong size, and this was the advise given from RLD.
Andy.
|
| 14th Feb 2017 12:24 pm |
|
|
