Member Since: 26 Nov 2011
Location: Gdansk
Posts: 327
[Wanted] interior dash panels in gloss black
I have managed to find the right hand vent and light switch panel in gloss black but would like to match up for the left passenger side and centre h panel.
Any available on the forum?
Click image to enlarge
Click image to enlarge
7th Jun 2017 11:01 am
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
The side ones are often on eBay, the centre one are rocking horse poo ! Maybe try breakers ? You will need the hazard switch pack from a rrs if you go for the 2 piece looking one like I did.Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
7th Jun 2017 12:02 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
that looks really nice
have u seen this by any chance , sit down first though before u look at the price
Member Since: 26 Nov 2011
Location: Gdansk
Posts: 327
I have been trying to find a breakers for the H trim from a later Disco 3. I was lucky to find the one I have so far on ebay but proving difficult to find.
Broadfields told me that unless they are original the quality is not so good.
7th Jun 2017 6:31 pm
Charliecloud
Member Since: 31 Jul 2014
Location: Tonbridge
Posts: 980
gstuart wrote:
that looks really nice
have u seen this by any chance , sit down first though before u look at the price
That 3 piece kit looks good value to me, no exchange, just straight purchase..............hmmm
7th Jun 2017 6:42 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
hi charlie
didn't realise at first the ones from powerful u.k. we're on an exchange basis
also see there are some on Ebay , but are classified as B grade due to marks etc
it does look really nice in the piano finish
9th Jun 2017 12:50 am
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1422
Remember something on Wheeler Dealers where Mike took similar type panels to a refurbishers and they changed the finish to a carbon fibre type finish but i think they could do it for other colours.
The finish was excellent and the cost was very reasonable.
It may have been for for the Range Rover.
9th Jun 2017 3:03 am
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Yes it was for the Range Rover they bought, I think it was water transfer ?Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
9th Jun 2017 7:37 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
that carbon fibre finish didn't look too bad
don't know what that kind of thing costs, assume it depends on what kind of finish u like
must admit the black piano finish i think looks the best
there also seems to be a lot more programs doing a full body wrap instead of spraying them , seen a few being done on the to series west coast customs
9th Jun 2017 9:28 am
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
It's becoming far more popular ! Something I have noticed. The true piano black trim centre panel has more chromey finish dash vents than the old one.Jarrod
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum