Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
SGS 3 ton trolly jack Don't Buy One
I've sent my SGS 3 ton trolley jack back it's fecking useless and so are SGS it struggled to lift either of mine motors especially at the top of its lift and the pump action was hopeless as well
I had to top the oil up bleed it etc still no use the 2 meshing cogs for lowering it down didn't always mesh imo cheap Chinese crap.
But of course SGS say it works fine for them
Lesson learnt buy cheap get crap
13th Jun 2017 9:43 pm
Johnhiggs
Member Since: 19 Feb 2017
Location: Reading
Posts: 123
Hate those type of jacks, I used to recondition the old Bradbury and Epco jacks from 60s and 70s, much better lifters , if you can get one cheap I have loads of seal kits etc still doing repairs and services on jacking equipment but I tend to stay away from the Chinese stuff, it's kind of throw away when it needs anything done to it.2006 D3 2.7tdv6 SE Zermatt (6A)
Front and rear light protectors
EGR's Blanked
704 rims
LED Interior lamp upgrade
2014/2015 navigation maps
DAB Motion
Parrott Mki9100 Bluetooth
13th Jun 2017 9:48 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4399
Its pretty much the rule for all tools. Older is better! Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
13th Jun 2017 9:53 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26699
Cheers Mick, I am looking for a new trolley jack now, so will avoid them.
13th Jun 2017 9:57 pm
DN D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2293
Thanks for the heads up mick D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
13th Jun 2017 9:57 pm
James W
Member Since: 27 Mar 2008
Location: Wirral, UK
Posts: 3067
I've been really pleased with mine it's been great for the past year or so.
Worried now!D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
13th Jun 2017 10:02 pm
LaserTam
Member Since: 31 Aug 2015
Location: Essex
Posts: 828
Mine too has been fine, no issues.MY2012 D4 HSE Nara Bronze with some extra stuff
13th Jun 2017 10:04 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Used quite a few of the SGS jacks and have only found reason to praise.Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
I've got a 30 yo sealy that needs a new seal as it's got a slight leak which still works better than the SGS and a customer donated me a trolly jack that at least 40 yo that's been chucked in a barn but still lifts the D4 & 130 with no issues.
SGS just don't give a stuff about it
13th Jun 2017 10:45 pm
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5095
Recently purchased a 10T extending bottle jack and axle stands from them and, apart from having to do another trip to get them from Coventry (apparently next day is an intent rather than a pledge) very pleased with them.
Their mail back to me on the courier timing (courier was quite clear they did not receive them the same day as the, well on-time, order) was rather terse, which was disappointing.Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
13th Jun 2017 10:47 pm
mick
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
Give it time I used mine a handful of times
If I'd have looked into it before and there bad feed back I wouldn't have bothered with them as it is now I will just get the seals done on my old one
13th Jun 2017 10:56 pm
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
No issues with the trolley jack here and mine is used in less than ideal conditions on the farm.==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
What weight rating has the scissor jack supplied with a D3/4 ?
I haven't looked yet (I will when I get access) but wondered if anyone knew if it's stated anywhere or labelled ?BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
Had mine for around four years now, has the spec changed and the quality has gone down
14th Jun 2017 6:27 am
kirkyworld
Member Since: 01 Mar 2016
Location: Northampton
Posts: 566
I bought the sealey 3000cxd and it is superb if you are looking for a replacement. I have the sgs compressor and that has worked well for a couple of years now.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
it struggled to lift either of mine motors especially at the top of its lift and the pump action was hopeless as well
the 2 meshing cogs for lowering it down didn't always mesh imo cheap Chinese crap.
) 
