dstevec
Member Since: 07 May 2017
Location: Dundee
Posts: 58
|
I've read a few threads about retrofitting front parking sensors. Ive got a 59 plate gs, so no front fogs, so am i right in thinking i need the loom for them to attach sensors? Would it be simpler just to get aftermarket sensors and wire them in independently? 4x4 Phase:
D4 - GS - Tints - More mods to follow.
Honda CRV 2.2 ctdi - owned 5 Years - Sold
Nissan X-trail SVE 2.2d - Written off after 1 year
Toy - Yamaha xjr 1200
|
15th Jun 2017 1:04 pm |
|
|
EIG
Member Since: 12 Feb 2009
Location: Enniskillen
Posts: 329
|
Yes you'll need the loom - keep an eye out on ebay - I found one for £35. I haven't done the front PDC mod but you'll need a few other things including the dash A/C heater control panel which has the front PDC sensor switch on it. Jim
D4 SDV6 SE TECH
2008 D3 TDV6 HSE G4 Challenge Vehicle
|
15th Jun 2017 2:04 pm |
|
|
dstevec
Member Since: 07 May 2017
Location: Dundee
Posts: 58
|
Dont suppose anyone has pics of the loom and switches required? 4x4 Phase:
D4 - GS - Tints - More mods to follow.
Honda CRV 2.2 ctdi - owned 5 Years - Sold
Nissan X-trail SVE 2.2d - Written off after 1 year
Toy - Yamaha xjr 1200
|
16th Jun 2017 8:12 pm |
|
|