- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
  
|
Hi all
Disco recently has been standing too high in normal ride height at the rear on passenger side
Today I stripped the brakes to free of sticking callipers and replace a piston in one whilst I was doing it I gave the sensors arms a bit of movement to see if they were free, the top of the extension of the arm where it goes onto the round spigot was seized so, I freed them off,
now it sits way to high on both sides and on the return journey from my bros it went into limp mode and the special programs shut down and dropped it to its knees,I stopped, let it go to sleep then restarted and it still sits too high but didn't shut down for the rest of the journey home,
I am going to borrow bros snap on diag next weekend and see what codes are there, but where should I be looking for the problem, is it knackered sensors or does it need resetting in diagnostics.
Be grateful for any help
Cheers   
Andy 05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
|
 18th Jun 2017 8:45 pm |
|
|
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
|
No ideas/pointers
 05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
|
| 19th Jun 2017 10:52 am |
|
|
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
|
Still, have this problem
but now as well as the rear lifting to a ridiculous height it now gives Amber then red fault light then goes into limp mode and dumps air,
where do I start looking
I am pretty sure I have a leak somewhere as when it stands for the week it drops to its knees, so I know I need to find this first
but what could make it pump the rear up so high ??
Any pointers be gladly received
Cheers
Andy 05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
|
| 25th Jun 2017 2:20 pm |
|
|
salmoner
Member Since: 09 May 2014
Location: Blackpool
Posts: 156
 
|
Sticking height censor possibly ?
|
| 25th Jun 2017 2:25 pm |
|
|
rovlecky
Member Since: 07 Aug 2012
Location: Aberdeenshire
Posts: 131
 
|
May need re-calibrated. if its sitting high at any point. Why does every page of the manual have fingerprints?
|
| 25th Jun 2017 2:30 pm |
|
|
Lorrydodger
Member Since: 15 Jul 2016
Location: Spalding
Posts: 9
|
The ride height sensor either needs re-calibrating or replacing and then re-calibrating.
|
| 26th Jun 2017 1:02 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
