tink
Member Since: 22 Sep 2014
Location: lincolnshire
Posts: 30
|
[Wanted] Anyone breaking 2.7 td 57 plate ish engine |
|
Hi has anyone broke or breaking a disco 3 2.7 engine for parts .
looking for a knackered left hand {view from driver seat } head with the camshaft caps ?
only need camshaft caps my F one broke [ DO4YA ] PART NUMBER on it DO4YA
much appretiated
tink
|
19th Jun 2017 9:12 pm |
|
|
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
|
Usually camshaft caps are line bored to the head they are on so not transferable!
|
20th Jun 2017 12:05 am |
|
|
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1419
|
You can get a secondhand one and measure the clearance with Plastigauge. Use one of the other bearings as a reference for the Plastigauge clearance value.
|
20th Jun 2017 2:46 am |
|
|
tink
Member Since: 22 Sep 2014
Location: lincolnshire
Posts: 30
|
Thank you any idea of where to get a second hand one tho without buying complete head .
Having a job ere
Regards
Tink
|
20th Jun 2017 9:57 am |
|
|
tink
Member Since: 22 Sep 2014
Location: lincolnshire
Posts: 30
|
defector wrote:You can get a secondhand one and measure the clearance with Plastigauge. Use one of the other bearings as a reference for the Plastigauge clearance value.
Does anyone know if the cam caps are the same on the left head and the right head as I've been offered a right side head cheap for the caps but mine is the left looking from driver seat
Tink
|
20th Jun 2017 9:59 am |
|
|