Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Iceman - thanks so much for sorting the images.
Couple of questions for you:
it look like the kit comes with the battery wires in it - did you not use those and buy your own because you wanted the red wire a bit longer?
did you use the black battery wire that came in the kit?
https://www.jgs4x4.co.uk/t-max-12v-split-c...s-monitor/
Don't suppose you ever remembered what the gauge was on the smaller red and black wires that went to the 12v plugs?
thanks again
Ben
2nd Aug 2017 8:40 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
The reason I didn't use the supplied cable was because it wasn't long enough and I wanted to colour code it! The Red cable I bought had a slightly larger gauge so being OCD I bought the black to match the red and binned the supplied cable!
As far as the cable size for the sockets I can't remember! What is it you will be running from them?
By the way........great name Ben
Ben
2nd Aug 2017 10:16 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Thanks Ben!
Feel free to ignore my pm as I think you've answered my questions already!
I'll be charging lipo batteries via a 12v socket. Think I'll install the dual USB socket as well.
With cables I always tend to go big so as not to fry the cable if it's too small!
For the black earth cable - how much did you need? Presumably not the same 6m as for the red?
Thanks
2nd Aug 2017 10:21 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Consider your PM ignored
Looking back at my setup, the highest rated fuse I have is 15amp and the highest rated socket is also 15amp so I guess you'd be safe going for something like this 25amp cable.
Like you I think it's always better to be safe than sorry!
Do you already have the lipo battery charger (I had to google lipo battery) as it may have the current draw written on it?
For the earth cable and from looking at my pictures I'm guessing 2m maximum, maybe 1m will do but without measuring I couldn't say for sure!
2nd Aug 2017 10:33 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Here's the spec from the charger according to google.
Input voltage: Compact car : 12.3-16 V; Full-size car: 25-30 V
DC output: 26.1 V; 3.45 A; 90 W
On to that could go a smart charge hub - which chargers 4 batteries, fullest one first, then moves on.
Batteries are either 4500 mah or 5700 mah or i'll charge batteries individually if it's quicker.
I've no idea what that means to my split set up?! Any ideas?!
2nd Aug 2017 10:56 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
I'm no expert but if the output is 3.45a then you should be fine. No idea if the charging hub uses more but if it only charges one at a time then I guess it'll be okay.
As long as your cable is rated higher than the fuse you install you'll be okay, so 25a cable with a 15 or 20a fuse is fine...........which I'm sure you already know
The 12v sockets I used are only rated to 15a so that was my limit!
3rd Aug 2017 12:27 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
Have ordered all the bits I think I need today.
Then realised I haven't got the battery tie down piece... the metal bracket that fits across the battery.
I think I've read that it's a left hand drive component. But what about the two metal studded bars that it bolts to? Are they already in place or do I need to buy those seperately?
I'm away from the D3 at the moment so can't check.
TIA
8th Aug 2017 11:08 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Your correct, the clamp is for a left hand drive vehicle, make sure they are aware of that when ordering as they might be helpful like in DSL's case and change it for a RHD when you actually want a LHD!
The bolts are separate and best ordered with the clamps, the part numbers for the bolts are XYG000051 and XYG500061.
Not sure on the clamp part number though!
8th Aug 2017 11:23 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
perfect, thanks for the info
9th Aug 2017 12:44 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
so I think I've got most of the bits now:
still the last few things to turn up
question for you:
where do you keep this lot to make room behind the little door?!
17th Aug 2017 8:57 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
In the bin
17th Aug 2017 8:57 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
The accessories I keep behind the door on the opposite side and I have a D1 bottle jack that fits nicely behind my control panel.
As tayaste says, my original jack is also in the bin!
17th Aug 2017 10:07 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13635
Disco3Ben wrote:
so I think I've got most of the bits now:
still the last few things to turn up
question for you:
where do you keep this lot to make room behind the little door?!
looks a nice bit of kit
may i ask do u normally hook up a solar panel system to the aux battery, or is it better to allow the aux deep cycle batteries to fully discharge then for the alternator to recharge them , thks
17th Aug 2017 10:10 pm
Ben4
Member Since: 28 Apr 2017
Location: Buckinghamshire
Posts: 934
I'm afraid I have no idea about the solar panel, but I am sure others will chime in
17th Aug 2017 10:57 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
I just let the alternator manage my aux. Battery gets used whilst engine off and recharged when engine running.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
