Dartanjang
Member Since: 20 Dec 2014
Location: Mountain Strokes
Posts: 77
|
| [Wanted] Front Door Inside Handle Cable |
|
While replacing the left side front door latch, I managed to break the plastic flange on the inside door handle cable. The one on the cable cover inside end that makes the cable snap and sit steady on the door card. It's thin plastic so super glue doesn't cut it. I simply need another cable. Some have reported that they received this cable toghether with a new door latch so I was keeping my fingers crossed that I would too. But the delivery yesterday was according to order, only the door latch as requested and no extra cable.
So does anybody have an extra cable lying around? One that perhaps came extra when a door latch was bought?
I assume that both left and right side would work as I see no reason for different lengths and the cable ends are symmetrical.
|
 14th Sep 2017 8:33 am |
|
|
Irwin
Member Since: 04 Aug 2015
Location: Internet
Posts: 270
|
Been there, done that! I don't have a spare cable but the part number for it is LR013916 and they are around €12
|
| 14th Sep 2017 12:37 pm |
|
|
Dartanjang
Member Since: 20 Dec 2014
Location: Mountain Strokes
Posts: 77
|
Thanks for the pt no. Good to have available. Also a little comforting to hear that I'm not the only one to snap that thin little piece of plastic. The design of it doesn't either leave any room for a creative amendment. I think that the only reasonable thing to do is to get a new one.
|
| 16th Sep 2017 4:34 pm |
|
|
