Member Since: 16 Aug 2017
Location: Leicestershire
Posts: 97
Front Headlight Wiring diagram
I am looking at fitting some halo LED rings inside my D3 headlights
These :-
i image i would connect these in parallel with the side lights. just thinking of the best way to achieve this , are there isn't any internal power to the lamp.
The company that supplies these ( i have seen these on ebay) will do all the work for you for £400 !!!!
including de-tango etc. you can pick up a setup of these leds for less than £50.
they sell the upgrade as a plug and play swap, so no loom changes, without taking a lamp out to look, was trying to figure where they are picking up the power. !
many thanks
Mark.
25th Sep 2017 7:12 am
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8043
Simples, take the supply off the empty "Chinese" connector situated in front of the rad, it powers on with the ignition switch, fit a simple relay to switch off when side lights are switched on
They cost <£10 a pair on Eblag.
It can when others can't,
It will when others won't,
It goes where others don't.
25th Sep 2017 7:56 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10336
side light connections will be obvious in the headlight. Red & black wires I think.
When people use an external ignition supply, I don't know how then get the wire out nicely.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum