ok ... thanks to Beanie and Martin I'm all set to go regarding the Altox controller installation.
However, when I open the panel where the scissor jack goes there's no obvious wiring to connect to. Not even the "wrong" connector that DSL found.
I've had my arm in as far as it will go (can even touch the underside of the panel where rear audio bits can be fitted) ... but i'm if I can find a loose connector anywhere.
bit loathe to dismantle the inside of the boot if I can avoid it but ...
I don't seem to have as much cable to play with as Beanie pics show.
30th Sep 2017 4:37 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18445
I think earlier D4s have the Telestart unit connector in an annoying place, they moved it in a later model year so it's a bit easier. Is the loom from me long enough?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
Yes Martin ... Loom is good but with the connector it mates with being so far away from the jack access panel , it was a case of attaching by feel rather than being able to see what to do.
Once connected, there is enough cable to fit the unit in a number of places ... Or just let it hang as I've done so far on basis I WILL get round to adding the temperature sensor and manual on/off switch..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
If anyone is after a giffgaff sim PM me ... I've a promo-one that arrived a day or two back. If registered before end October, you get an extra £10 credit and I get £5 too. Win-win..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
12th Oct 2017 5:52 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9402
So I found the location of the connector, a few pics here:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
I've set-up the SIM and placed the sim into the ALTOX, didn't see any flashing LED though, ignition was on
I've then sent a text to the SIM with APN1, APN2, APN3 etc but no reply or flashing LED
I know I can be a bit thick at times, but what am I doing wrong?
Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
did you initialise the SIM in a normal phone first ?
could you text it then ?.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
if I can find a loose connector anywhere.
found it ... Wrapped in foam and not for pulling to somewhere sensible.
