Phortoes
Member Since: 06 Oct 2017
Location: London
Posts: 2
  
|
| Brake actuator & cables replacement- London/Hertfordshire |
|
Can anyone recommend a reasonable and good garage that can replace this please. EPB wouldn't release so cable was cut hence need replacement.
Please let me know.
Thanks.
|
 11th Oct 2017 7:45 am |
|
|
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 924
|
www.rrlondon.co.uk ? Visitor from fullfatrr.com
RR Vogue SE 2011 4.4 TDV8
1974 Lightweight
|
| 11th Oct 2017 12:38 pm |
|
|
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
 
|
Where in London are you its a big place?
My friends down at Kings Langley Land Rover will probably help.
They were all EX Land Rover Main Dealer running an LR owned Independent that shut down as now used only to prep new vehicles due to the massive increase in new car sales...
but have set up a new Independent business next door!
Say Gary Elliott recommended you...
|
| 11th Oct 2017 1:27 pm |
|
|
Phortoes
Member Since: 06 Oct 2017
Location: London
Posts: 2
|
Thanks both. I will look them up.
|
| 13th Oct 2017 6:55 am |
|
|
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
|
Its not Kings Langley Land Rover anymore its now "Langley 4X4 " 01923 266333
|
| 13th Oct 2017 7:16 am |
|
|
Nasher
Member Since: 07 Mar 2009
Location: Clanfield, North of Pompey - UK
Posts: 2681
 
|
Easy enough to do yourself actually.
Once disconnected from the wheels, all you need to remember is to note the route the cables take around the axle etc, then remove the spare wheel so you can work from within the spare wheel space to remove the module.
You undo the bracket holding the module to the chassis and drag it all out backwards.
Swap the bracket to the new module then feed it all back in.
From memory a 10mm(Could be 9 or 12mm) swivel head ratchet spanner is really helpful to get to the bracket to chassis bolts.
Nasher Heaven doesn't want me, and hell is afraid I'll take over.
|
| 13th Oct 2017 11:55 am |
|
|
