mz mini
Member Since: 02 Jul 2014
Location: Sunny Devon
Posts: 1759
|
Engine System Fault not cured |
|
Gents popped down the road to get an Engine System Fault up on the dash
no EML light on and no codes on my code reader
whats the way for forward please
thanks
MZ Land Rover 90 - deceased
Discovery 3 - deceased
Discovery 4 2013
Mini Cooper S 1964 Mk1 - International Rally winner red & white
Mini Cooper s 1964 Mk1 - Road Rally champion green & white
Mini Cooper S 1971 Mk3 - original and unrestored
Porsche 911 997
Porsche Boxster 3.4S
VW Polo 1.2
Citroen Xsara Picasso - shed/run around
|
2nd Mar 2018 2:16 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
|
Possible battery or connection problem - what was the code?
saw no codes after rereading
|
3rd Mar 2018 2:56 am |
|
|
mz mini
Member Since: 02 Jul 2014
Location: Sunny Devon
Posts: 1759
|
All back to as normal today well as normal Disco 3 can be
started fine slight misfire as per usual due to 2 sleepy glow plugs
no fault codes or messages drove fine
I did read about really severe cold weather throwing up spurious codes and EMLs
I hoping that I might be lucky and the weather is the culprit ,will get Woody 32 to check for any stored codes Land Rover 90 - deceased
Discovery 3 - deceased
Discovery 4 2013
Mini Cooper S 1964 Mk1 - International Rally winner red & white
Mini Cooper s 1964 Mk1 - Road Rally champion green & white
Mini Cooper S 1971 Mk3 - original and unrestored
Porsche 911 997
Porsche Boxster 3.4S
VW Polo 1.2
Citroen Xsara Picasso - shed/run around
|
3rd Mar 2018 1:40 pm |
|
|
fhb22266
Member Since: 11 Jul 2014
Location: Oban
Posts: 36
|
I also get this as well from time to time.
It occurs if I am in a high gear (5 or 6) and push down the accelerator hard. Usually huge black smoke screen out of tail pipes (EGR valves disabled and blanked).
After engine is turned off and started again warning is cleared. No faults detected with IID BT.
Any suggestions?
Manual box BTW.
|
23rd Mar 2018 5:31 pm |
|
|