PAV07
Member Since: 31 Jul 2014
Location: Williton
Posts: 13
  
|
| Issues with Disco 3 suspension |
|
Hi wondered if any one could help with some advice please. I am not a mechanical person so I may be being stupid however.....
I had the below come up as advisories on my MOT this year. I only had my front lower and rear upper wishbones replaced last year and there was no mention of any of the below when the garage did it. To top it off its only done about 8000k this year so not huge milage.
It also says on the bill from last year they replaced the LHR lower ball joint and front D bushes. Just wondering if the garage did what they said they did when it went in.
Nearside front front suspension has slight play in a track control arm inner bush (2.5.b.2b)
Offside front front suspension has slight play in a track control arm inner bush (2.5.b.2b)
Nearside rear trailing arm has slight play in a pin/bush (2.4.g.2)
Offside rear trailing arm has slight play in a pin/bush (2.4.g.2)
Nearside rear radius arm has slight play in a pin/bush (2.4.g.2)
Offside rear radius arm has slight play in a pin/bush (2.4.g.2)
Any advice would be great
Thanks
|
 6th Jun 2018 7:06 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
  
|
Unfortunately things do wear, however these are only advisories, that is to say they could be like this for a long tim before they are significant Must stop buying shiny toys....
|
| 6th Jun 2018 10:55 pm |
|
|
