BoodaD3
Member Since: 06 Jan 2022
Location: Aberdeen
Posts: 3
  
|
| Electrical issue causing cut-off and suspension lower |
|
Hi all,
Having another electrical caused issue with the D3. Runs for a while without issue, then cuts out (engine still running) but does not allow drive, then suspension lowers. Switch the D3 off and start back up again and everything is fine for a few hundred yards and cuts again (engine still running), suspension lowers, no drive.
Have the pictured warning lights on the dash when this happens. Took it in to an “LR Specialist” and he taped up wires behind the plastics of the rear near side, wheel. Worked without issue for about 400miles and is now doing the same thing. Any ideas at all? Have called the “LR Specialist” I took it too originally but not interested. Cheers for any help on understanding the issue.
|
 24th Apr 2022 7:24 pm |
|
|
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4153
  
|
That wouldn't be the "LR Specialist" in Blairs would it ?  you know the one that never answers the phone 
Try asking if anyone close by has an IID tool so you can read the codes, and then get it down the road to Dundee to get it fixed properly  I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
| 24th Apr 2022 8:16 pm |
|
|
