Member Since: 16 Feb 2016
Location: London
Posts: 10
Egr problems help please
Hi I’ve got a disco 3 2008
Had egr fault code coming up for right side so I replaced it 2 month later getting same symptoms but no fault code or error messages so just replaced the the other one and still no different
Loss of power but the kicks in after about 5 to 10 seconds sometimes have to drop a gear to get higher reves to to it going
Any help please thanks in advance
27th Aug 2018 12:10 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4674
Is the EML on?yµ (idµ - eAµ) ψ=mψ
27th Aug 2018 1:43 pm
Sipen3580
Member Since: 16 Feb 2016
Location: London
Posts: 10
No lights messages or fault codes
27th Aug 2018 2:27 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4674
Try cleaning the MAP sensor! If there's a component or circuit failure the system can't ignore it and you would have a DTC. As a matter of interest, can you hear the EGR's cleaning themselves when you switch off the ign? An audible clicking for about 4 to 5 secs on both sides of the engine!yµ (idµ - eAµ) ψ=mψ
27th Aug 2018 2:38 pm
Sipen3580
Member Since: 16 Feb 2016
Location: London
Posts: 10
I did get a fount code about a week ago cleared it and not come back since
P0401 exhaust gas recirculation flow insufficient detected
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum