Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Epb issue and query
Post Reply  Down to end
Page 1 of 1
Batfink
 


Member Since: 31 May 2017
Location: Isle of Sheppey
Posts: 1510

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3
Epb issue and query

My epb stoped working but luckily off rather than on. Was making a small screech which has always done since owning it. One day just threw up red and amber lights and error on dash. Then cleared and then next time I used the car errored upon start up without even touching the button.

Have fitted and adjusted new parking shoes as plug was missing from one of the discs and shoes were past it. Had it scanned with an iid and wont even communicate with the epb. Is there a ecu or module between the switch and actuator underneath the car?

Wondering if it could be a poor connection or broken wire somewhere. Have had a very quick glance at block by n/s rear wheel and nothing obvious there and epb box under car is plugged in as checked that too.

Probably will be putting the car up for sale soon and thats the only thing stopping me atm.
 2006 TdV6 HSE.  
Post #202378830th Jan 2019 10:23 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site