Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Photo request - behind rear right boot panel MY14 to 16
Would anyone have a photo of the mounting brackets behind the right boot panel from a MY14 to 16? Specifically where the TIM mounts?
Thanks.
30th May 2019 11:10 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
I’m confused now as to where the Telephone Interface Module fits (connect to View). The parts diagram implies it’s behind the right boot trim but the wiring diagram wire lengths are far to short. Anyone know where it would fit?
31st May 2019 3:22 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1809
Do you mean bluetooth?
It changed around MY12 to be built into head unit in front console unit. Rear quarter panel holds DAB, Amplifier and (if fitted) tv tuner and rear entertainment (RE might be under seats actually)
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Thanks, it’s not BT, it’s the Telephone Interface Module or Connect To View. It gives you the “in control apps” option.
The parts list shows it on a bracket next to or attached to the bracket you’ve fitted but the wiring diagram doesn’t really fit with that position.
31st May 2019 8:27 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
And the bracket you’ve just fitted with RSE, DAB and KVM.
31st May 2019 8:30 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1809
Ok you are ahead of me there as hadn't realised it needed another module . For InControl apps (which has been slated for lack of apps and functionality.. and don’t confuse this with Carplay as it isn’t that )
Parts that I know of for InControl (duckworth prices when i last checked)
LR062813 Discovery 4 Entertainment Socket AV USB £45.00inc vat
harness LR055235 £67.00Stolen - D4 Loire Blue
D4 Bali Blue
31st May 2019 10:32 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 585
I would quite like incontrol apps. Are you guys trying to retro-fit it?
31st May 2019 11:10 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Famousfive wrote:
Ok you are ahead of me there as hadn't realised it needed another module . For InControl apps (which has been slated for lack of apps and functionality.. and don’t confuse this with Carplay as it isn’t that )
Parts that I know of for InControl (duckworth prices when i last checked)
LR062813 Discovery 4 Entertainment Socket AV USB £45.00inc vat
harness LR055235 £67.00
LR055235 only gives you the connection for a USB and Aux and is only a short cable. Its actually for the rear seat entertainment connection. I have the number of the cable from a Jag if you want it as LR don't do an overlay for the Connect to view.
31st May 2019 11:24 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
mjom89 wrote:
I would quite like incontrol apps. Are you guys trying to retro-fit it?
Yes, but I'm struggling to identify where the module is fitted. I cant decide between in the boot, under the passenger seat next to the Camera module or in the dash behind the glove box.
I'm fitting to a RRS aswell so have extra issues to overcome, an L319 should be easier as the FCDIM can be replaced and have the software already pre-loaded.
31st May 2019 11:26 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 585
Keep us updated - I will be watching with interest!
1st Jun 2019 8:00 am
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 585
How are you progressing with this? I’m still watching with interest!
6th Jun 2019 10:04 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Not much to update really, I’ve wired the TIM connector with nearly all the correct wire colours and size as per the LR4 wiring manual, the only incorrect wires being the CAN wires. These should be 0.35 CSA in Yellow/Blue and Yellow/White but I couldn’t find any in my stash or on line. So I’ve gone with 0.35 CSA in Blue and White. I really need to either find the correct place to fit it or I put it behind the dash or under the car passenger seat next to the Camera module. I really do think the part list is incorrect to show it in the boot, the wiring loom would need to be about 4 meters long which is much longer than the wiring diagram shows.
7th Jun 2019 3:50 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1809
Looking good - was really keen to do this until reading this write up on the Freel2 Site
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum