Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
I’ll take a look tomorrow, thanks again
29th Aug 2019 8:49 pm
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Old D3 mirrors;
29th Aug 2019 9:04 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
That’s one of your problems, the new mirrors don’t have everything that your old ones did. The new ones use common wires so powerfold is common to dipping for example, if one isn’t connected it will take other systems down to.
Where are you? Just seen...Harrogate. Do you ever come Lincoln way?
Do you have memory too? I imagine that’s not working either.
30th Aug 2019 10:24 am
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Ahhh, it’s not looking good then!
I do have memory in my car, haven’t checked if it’s working on the new mirrors, very much doubt it though!
Don’t ever come to Lincoln, I certainly would if it meant my mirrors would work as they should though
30th Aug 2019 10:36 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
I’ll have a look through the diagrams and at my car, I’ll also see what mirror stuff I have too.
Do you have puddle lamps?
30th Aug 2019 6:57 pm
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Thanks mate, really appreciate any help you might be able to give me!
The mirrors don’t have puddle lights....
30th Aug 2019 7:09 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Did your original mirrors have them?
30th Aug 2019 8:48 pm
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Nope
30th Aug 2019 9:04 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Getting somewhere now
Pink and Blue are power fold
Blk/white and Blk/Blue are heated mirror.
Second Blue, Green, White/Red are X/Y and Common earth.
So you don’t have memory motors in your new mirrors..... not a problem though as I think the motors are the same for both Disco 3 and 4.5
Second connector is definitely for the memory/dip in reverse so that the reason for that issue.
The power fold issue i think is down to the Disco 3 having a dedicated fold back module and the 4.5 sharing the X/Y and powerfold circuits. I think we could over come this by either modifying the 4.5 loom or fitting the Disco 3 loom (this is probably the better idea with additional indicator wires) to the 4.5 mirrors. If you fancy a trip down to Sleaford so we can fix, let me know.
31st Aug 2019 1:51 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Or if you don’t need the car you could mail me the mirrors.
31st Aug 2019 2:16 pm
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Wow, thank you so much mate!
Can’t believe the effort you’ve gone to to help a stranger out!
It would probably be easiest for me to come and see you sometime if you’re sure you don’t mind taking a look for me?!
31st Aug 2019 3:42 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
It’s no prob mate, it’s probably not a big job, a few hours. I’ve had quite a few of these mirrors apart now and made quite a few hybrids. My current mirrors are Disco 4.5 mounts, wading sensors and wiring with L494/L405 shells, Cameras, Electrochromatic mirrors and wiring.
31st Aug 2019 9:53 pm
Danny4383
Member Since: 07 Oct 2018
Location: Harrogate
Posts: 222
Thanks mate, I’ve just sent you a PM.
Don’t suppose you’re handy with headlight wiring too?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum