Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Outer CV Gaiter (rear) replacement. Guidance please
Post Reply  Down to end
Page 1 of 1
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 373

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3
Outer CV Gaiter (rear) replacement. Guidance please

Hi all. While happily replacing my side steps today. I removed the o/s rear wheel to access the cill cover screws and investigate the rear brakes as I noticed the pads are low and the EPB made a nasty noise the other day (not that I usually use it ) any way. As I was finishing I saw a nasty sight.



Ouch. I checked and it’s split.

I have taken a look at the Haynes manual but am not happy with what I have read as it focuses on driveshaft overhaul.

What is the method of changing this gaiter please. Is it something I should be ok to do?

What advice can you give me ?

Thanks in advance guys and gals
  
Post #211587026th Jan 2020 5:50 pm
View user's profile Send private message View poster's gallery Reply with quote
aja4x4
 


Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

Is it split or has it just worked loose from the securing ring because thats what it looks like from the photo.

If its not split its an easy repair. I would remove both securing rings and slide the boot up the shaft a bit so that you can clean all the contaminated grease away. Then apply some new cv grease and put the boot back in place with new securing rings. I have a local parts van that i buy the securing rings from as the cheap ones in the kits seem to be quite weak.
  
Post #211588426th Jan 2020 6:24 pm
View user's profile Send private message View poster's gallery Reply with quote
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 373

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Sadly it has split. Sad
  
Post #211588826th Jan 2020 6:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Globetrotter448
 


Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783

Australia 2007 Discovery 3 4.0 V6 Petrol SE Auto Java BlackDiscovery 3

This may be useful as it does not require disassembly
  
Post #211599127th Jan 2020 5:08 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site