Member Since: 20 Oct 2020
Location: Alton Hampshire
Posts: 5
D3 2.7 tdv6 water leak
anyone know how hard this plastic housing is to change can it be done without wo much being removed
Thanks matt
128/normal_TDV6.jpg[/img]
20th Oct 2020 7:15 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Hello and Welcome
What problem do you have?
20th Oct 2020 7:24 pm
MATTC90
Member Since: 20 Oct 2020
Location: Alton Hampshire
Posts: 5
Thanks for the reply I have a water leak from this housing circled I have attached another photo
Last edited by MATTC90 on 20th Oct 2020 7:52 pm. Edited 3 times in total
20th Oct 2020 7:37 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Sorry cant help with your problem but may help to enlarge your photos
just remove the "normal_" from the photo text in your post
20th Oct 2020 7:47 pm
MATTC90
Member Since: 20 Oct 2020
Location: Alton Hampshire
Posts: 5
No problem thanks
20th Oct 2020 7:53 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10379
Few jobs are easy on these.
You need to go in thru the wheel arch I think.
Question is. Do you need to remove the pas pump !
20th Oct 2020 8:11 pm
Discoboi55
Member Since: 08 Dec 2019
Location: Suffolk
Posts: 4
Through the wheel arch, remove the intercooler pipe (or at least move it out of the way). After that that elbow should be accessible without removing the PAS pump.
20th Oct 2020 8:19 pm
MATTC90
Member Since: 20 Oct 2020
Location: Alton Hampshire
Posts: 5
Thank you for the reply i shall have a look thanks again
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum