Bubblehead
Member Since: 01 Jun 2020
Location: Horndean
Posts: 214
|
Morning all,
My car went into the garage for an MOT recently, ended up staying to have a couple of ball joints replaced.
Anyway, got dropped back off to me yesterday.
I went to go out this morning, started up fine, but when I went to pull away there was literally no power whatsoever.
It wouldn’t drive up the hill to get out of my road, which is not particularly steep.
It wouldn’t rev in neutral until the turbo kicked in either.
I’ve done some reading, and it says EGR, but it is already blanked. No warning lights, no limp mode.
Any ideas please? Been without a car for 2 weeks and now this. 2005 Disco3 HSE Auto 😁
|
1st Oct 2023 10:05 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10368
|
random thoughts
have they done a service and changed the fuel filter ?
boost leaks - hoses or intercooler
|
1st Oct 2023 11:12 am |
|
|
Bubblehead
Member Since: 01 Jun 2020
Location: Horndean
Posts: 214
|
No, literally just some suspension work.
By all accounts it ran fine and normal on its way home.
I think to be fair, if it was like it when it was dropped off, they wouldn’t have been able to reverse it onto the drive with the lack of power. 2005 Disco3 HSE Auto 😁
|
1st Oct 2023 11:26 am |
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4148
|
Do you have access to a fault reading tool? Either IID or Autel.. get the codes read and go from there, there might be someone close to you on here who could help? I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
1st Oct 2023 11:28 am |
|
|
Bubblehead
Member Since: 01 Jun 2020
Location: Horndean
Posts: 214
|
Shows how much I pay attention.
They changed an upper front arm. I thought it was just rear that was being done.
Doing so, they had removed the air inlet pipe and not done up the jubilee clip by the maf senser.
Must have noticed running poor when bringing it back.
But, easy fix.
All sorted.
Thanks for the replies. 2005 Disco3 HSE Auto 😁
|
1st Oct 2023 4:40 pm |
|
|