Skandimike
Member Since: 26 Aug 2010
Location: Billingham
Posts: 51
|
2.7 TDv6 euro4 into a euro 3 |
|
Hi Guys wondering if anybody can offer advice .
I am installing a 2007 euro 4 engine into a 2006 euro 3 disco. if anybody has done this could any advise on what modifications are required to the fuel system are needed to allow this swap. Mike
|
24th Mar 2022 6:52 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20733
|
Everything...
HPFP, belt and covers
Injectors
Fuel rails
Injectors and feed pipes
Engine wiring loom
EGRs are different
Coolant system is different
Not impossible, but a PITA My D3 Build Thread
TDV8 Retrofit Build Thread
|
24th Mar 2022 6:56 pm |
|
|
Skandimike
Member Since: 26 Aug 2010
Location: Billingham
Posts: 51
|
AS i have the complete engine including the wiring loom, i was hoping it would be a straight swap as for as i can see its only the fuel lines that need some mods as the filtration system is different on the later model and the power steering and brackets will straight swap from the original.
Going for the HP pump, injector, fuel and pipework swap as well as the wiring loolrail Mike
|
24th Mar 2022 7:23 pm |
|
|