| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Hi all
After a little guidance….. D3 has the red Srs light on…….. is this an mot failure??
So I’ve replaced the squib for a new one and also used to no avail, still the same fault codes which are;
B0001-1a
B0070-1b
Tried to reset the codes but come back on nearly straight away…….
I went into the live data and I’m not sure if connected but seemed strange. When I plugged both of the front seat belts in, both came up with Safety belt sensor fault and show as unbuckled ???
Has anyone come across this before, am I being an ass and the answer is simple??
Any advise would be awesome
Cheers
Steve
|
 25th Apr 2023 6:49 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Just also noticed in the live data, the following message
Passenger air bag cut off switch - switch A fault
I’m guessing this is also connected, but again would appreciate anyones views
Cheers
|
| 25th Apr 2023 6:58 pm |
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4153
  
|
Have you knocked the seat wiring connection box (just under the front seats)? might be worth undoing the 7mm bolt head and checking the connections... I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
| 25th Apr 2023 7:13 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Yes, I’ve found that and all connectors are in place.
|
| 25th Apr 2023 7:20 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Just a though…… are there meant to be the same amount of plugs going into the back of the unit as coming out the front ???
Also, just for info really…. Driver seat base, rear left if sat on it……there’s some dangling sensor on a bracket, is that for impact sensing or similar ??
|
| 25th Apr 2023 7:26 pm |
|
|
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 767
 
|
rac060804 wrote:Yes, I’ve found that and all connectors are in place.
try taking them out of the box mine got very temperamental a few years ago also check whether the wires that run tight to the seat frame are not pulled tight against the metal frame
i think mine was a combination of both it been ok for a while now but every time the wife moves the seat i wince expecting the light to come back on 
I'm assuming you have manual seats as if you do the loom runs very close to the lever for moving the seat back/forward
persistence and switch cleaner are your friend with this one  please excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
|
| 26th Apr 2023 9:55 am |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Well, I’ve got rid of the one code, just B0001-1a still showing….. about to go under the seat and have a look.
|
| 26th Apr 2023 6:05 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 65
|
Ok, so just to eliminate, I’ve put an old squib back in and I can clear the fault…… well until I turn the steering wheel
Me thinking a new squib and maybe worth replacing the wiring from squib to airbag?
|
| 26th Apr 2023 6:26 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
