Member Since: 13 Jul 2020
Location: Cluj Napoca
Posts: 16
AMK Compressor part identification
Hello,
my compressor is not achieving nominal pressure. I get error 'Pressure increases too slow'.
There are no leaks, pressure holds over night in tank and in gallery. Monitored it with diagnostic equipment. Pressure sensor ok. Ran compressor under water, no air bubbles coming out
Piston looks ok, bearing ok
I thing this part may be at fault, but i can not find a replacement or product code. Could anyone help out?
Click image to enlarge
Click image to enlarge
It is located here in the compressor, between the second piston head and the dryer block.
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
21st Mar 2024 11:27 am
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2288
could be this one?
https://klifex.com/klapan-cilindra-kompres...abco-i-amk- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
21st Mar 2024 3:54 pm
infinity7117
Member Since: 13 Jul 2020
Location: Cluj Napoca
Posts: 16
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum