CY
Joined: 16 Aug 2005
Location: The Bonnie Banks of the Forth
Posts: 3250
 
|
| Underweight jack, cracked fog light cluster and creeping EPB |
|
Firstly, the mandatory before, during and after of todays wash job on the D3...
A few issues raised after washing it. A very light scratch was discovered running the length of the offside doors, looks a bit rubbery and should eventually scrub off. Another dink in the door from another helpful and honest person who's opened their door into ours and legged it.
Moreover, I noticed the front fog light cluster is quite cracked, almost shattered, but it is behind the glass and the cracks cannot be felt  We have not driven into anything and there is not evidence at all of damage which would suggest someone else has hit it. However there is a noticable gap between the glass and the plastic of the bumper. Could something have caused the glass inside to crack without external force?
It's not noticable until you look closely so it will be left for now.
 | | Click image to enlarge |
Secondly, we were having a look at the jack my Uncle used to replace the front drivers side tyre (completely oblitorated by a nail) the other week and noticed it says that the maximum weight limit is 1900kg. I've not asked him as he's on business in canada but that is the jack provided by Land Rover and was all that was availble when in remote Scotland at a weekend break. Surely this is unacceptable and Land Rover shouldn't be providing a jack with a maximum load limit of 800kg less than the standard weight of the car? Is this normal procedure?
Also, I programmed the remote to raise and lower the suspension with the hazard lights on. Pretty cool stuff, but the car creeps forwards and backwards considerably, even with the EPB applied, when raising and lowering it. Is this normal? Also, will the suspension return itself to normal height when you start it up again, or should the level be returned manually from inside?
Finally, realised that we've got quite a lot of those orange dots on the paintwork which Gareth mentioned earlier. Unfortunately for us we don't have the services of Ken nearby so it's difficult to shift.
The cleaning continues tomorrow, getting some polish and sealant on it and gutting the interior.
P.S. a bit off-topic but somebody (I hasten to add it wasn't me though the blame lies unrested) has kerbed the passenger-side alloy of the Volvo and taken all the coats off it, right down to the metal. Without paying to have it done by Chipsaway or similar, is there any recommended way of masking or covering up the damage? DISCO3's Student Correspondent...
Discovery 3 TDV6 SE
Volvo V70 T5 SE
|
 Sat Apr 26 2008 11:53pm |
|
|
Maverick
Joined: 25 Jul 2007
Location: Aberdeenshire!
Posts: 1474
|
| Re: Underweight jack, cracked fog light cluster and creeping |
|
CY wrote:it says that the maximum weight limit is 1900kg. I've not asked him as he's on business in canada but that is the jack provided by Land Rover and was all that was availble when in remote Scotland at a weekend break. Surely this is unacceptable and Land Rover shouldn't be providing a jack with a maximum load limit of 800kg less than the standard weight of the car? Is this normal procedure?
The jack won't be lifting the cars total weight though, just one corner of the car. The jack should be fine to use! Happiness is a vectored thrust! (As seen on a Harrier GR3)
 1980 Series 3 restoration - Mine
 Very dirty 1996 Defender 90 - Soon to be mine!
 Stornaway Grey D3 HSE - Dads!
Asure Blue S1 Lotus Elise - Also dads!
Relentless in one hand, Strongbow in the other! 
|
| Sat Apr 26 2008 11:58pm |
|
|
WhiteD3
Joined: 04 Feb 2008
Location: Brisbane
Posts: 19
 
|
Well technically that scissor jack might be OK, but it's duty should be limited to a flat garage floor. I've had to use it twice in anger, off road and its frightening to see the flex in the thing.
I did this:
http://www.aulro.com/afvb/d3-zone/52937-new-d3-bottle-jack.html
Had to make an attachment for it to lock into the chassis rail.
Don't forget to buy a decent 22mm socket and 1/2" wrench to suit.
Cheers.
|
| Sun Apr 27 2008 6:04am |
|
|
SN
Joined: 03 Jan 2006
Location: Doing the Lambeth Walk
Posts: 6965
 
|
Creep is normal when lowering/raising suspension, you need it - the wheels are actually expanding apart / contracting together during the transitions - think about the levering angle of the suspension arm changing Steve N (qzd)
|
| Sun Apr 27 2008 10:21am |
|
|
WhiteD3
Joined: 04 Feb 2008
Location: Brisbane
Posts: 19
|
SN wrote:Creep is normal when lowering/raising suspension, you need it - the wheels are actually expanding apart / contracting together during the transitions - think about the levering angle of the suspension arm changing
Yes, fair enough, but when my jack is "creeping" I prefer something more substantial than the crappy el-cheapo bit of kit that comes with the car. I mean the D3 is brilliant off road, you would think it would come with a suitable jack and brace (which I've managed to break).
|
| Sun Apr 27 2008 10:57am |
|
|
simon
Joined: 11 Jan 2005
Location: Do you really need to know ?
Posts: 13943
|
SN means creep when changing suspension height not when changing a wheel.
Agree the jack is pretty flimsy, but then it is designed for level firm surfaces and not as an off road recovery jack. Its for emergency use only, not a a habitual wheel changing tool 
|
| Sun Apr 27 2008 11:38am |
|
|
countrywide
Joined: 16 Sep 2007
Location: Sunny South Coast
Posts: 1282
|
If you any good with paint, buy a airbrush kit from Halfrauds and get some silver alloy wheel paint. If you give the damaged area and good wet & dry rub down and then prime, you can blend it in with a fine air brush and then clear coat over the top. Just make sure it is thinned down enough for the air brush. I did all my Alfa wheels and they looked really good (in my opinion of course)
|
| Sun Apr 27 2008 3:38pm |
|
|
CY
Joined: 16 Aug 2005
Location: The Bonnie Banks of the Forth
Posts: 3250
|
Hopefully wont have to use the jack very regularly. The wrangler which was ruined was only had a few thousand miles on it  .
Only confusion now seems to be the cracked fog light
A few more... Sorted out the interior today:
 | | Click image to enlarge |
 | | Click image to enlarge |
And got a good coat of SRP on the paint which brought out a nice shine:
 | | Click image to enlarge |
 | | Click image to enlarge |
Not bad for the 3 and a half year old bird 
Countrywide, the alloys solution sounds good but I dare say our gash might be too deep. What do you think?
 | | Click image to enlarge |
 | | Click image to enlarge | DISCO3's Student Correspondent...
Discovery 3 TDV6 SE
Volvo V70 T5 SE
|
| Sun Apr 27 2008 11:16pm |
|
|
simon
Joined: 11 Jan 2005
Location: Do you really need to know ?
Posts: 13943
|
mmm getting a bit too detaily again mate 
Looks clean for sure though
And I would get some rubber mats not the curled at the edges carpet mats you have.
|
| Sun Apr 27 2008 11:21pm |
|
|
CY
Joined: 16 Aug 2005
Location: The Bonnie Banks of the Forth
Posts: 3250
|
Yep the carpets are awful and don't serve much purpose as they simply slide away. Do the rubber ones have fixings to secure them down?
The initial thought was more comfort/luxury feel over utilitarian, but they've since worn thin to the equivelant of soft cardboard DISCO3's Student Correspondent...
Discovery 3 TDV6 SE
Volvo V70 T5 SE
|
| Sun Apr 27 2008 11:24pm |
|
|
CY
Joined: 16 Aug 2005
Location: The Bonnie Banks of the Forth
Posts: 3250
|
simon wrote:mmm getting a bit too detaily again mate
Gah, you should see the condition of it up close. (Needs clayed but I've not worked up to that yet). The T5 on the other hand...
 | | Click image to enlarge |
 DISCO3's Student Correspondent...
Discovery 3 TDV6 SE
Volvo V70 T5 SE
|
| Sun Apr 27 2008 11:32pm |
|
|
simon
Joined: 11 Jan 2005
Location: Do you really need to know ?
Posts: 13943
|
CY wrote:Do the rubber ones have fixings to secure them down?
Yes they do. And they are in no way not posh looking
Do a great job at keeping the dirt off the fitted carpets too. Benefit from being jet washable for cleaning and will last far longer than the ones you have.
Available for all three rows.
|
| Mon Apr 28 2008 12:15am |
|
|
simonsi
Joined: 14 Oct 2007
Location: Leicester
Posts: 614
|
CY wrote:Only confusion now seems to be the cracked fog light
I would have thought a stone looks the most likely culprit. Cheers
Simon
TDV6 S Auto - Zambezi Silver - JE Tune - RRS 19" - Sidesteps - Roof Rails
Body Side Strips - Xenons - Bright Pack - Cold Pack - Premium Stereo
Alpine Roof - Towpack - Alpine Touchscreen Satnav - Veba Rear DVD changer
Alpine Roof Monitor - Webasto FBH Timer - Awesome Brembo Frt & S/C Rr Brakes
|
| Mon Apr 28 2008 7:01am |
|
|
Googsy
Joined: 06 Aug 2007
Location: Celbridge, Co Kildare.
Posts: 630
|
CY
What kind of hose connection / foamer do you use for washing car?
Googsy
2005 HSE Zambezi Silver
19s thankfully
Roof Rails
Side Protection Strips
Turbochip courtesy of Mr Tyler
Black Badges.
No lock nuts
Beauty is in the eye of the beer holder...
|
| Mon Apr 28 2008 7:35am |
|
|
SN
Joined: 03 Jan 2006
Location: Doing the Lambeth Walk
Posts: 6965
|
simon wrote:mmm getting a bit too detaily again mate
Look at it this way - how many people on here would spend time discussing cleaning the house? Steve N (qzd)
|
| Mon Apr 28 2008 8:21am |
|
|
